Teamac Mordant Solution T-Wash
Teamac Mordant Solution T Wash available in 5 litres, is a pre-treatment liquid for use on new galvanised metal. Teamac Mordant Solution T-Wash can be used to improve the adhesion of coating systems as well as a cleaner for the original substrate.
Teamac Mordant Solution T Wash is part of Promain's fantastic range of Thinning and Cleaning products that deliver high standard results.
Best Uses
Teamac Mordant Solution T-Wash is best used to clean surfaces before applying decorative coatings, and works well to provide protection to the substrate. Teamac Mordant Solution T-Wash must be used before you paint new galvanised steels in order to remove the salts.
Application
Teamac Mordant Solution T-Wash can be applied by soaking a rough sponge or cloth and scrubbing the metal surface with the solution. Teamac Mordant Solution T-Wash is available in 5 litre containers and when dry produces an etched surface.
Surface and Environment
Teamac Mordant Solution T-Wash is designed for use on galvanised steel and zinc surfaces such as hand railings, piping's, light columns and structural steel in order to produce an etched surface. Teamac Mordant Solution T-Wash can be used internally or externally as a metal cleaner.
Notes
- Teamac Mordant Solution (T Wash) is a pre-treatment liquid for new galvanised metal
- Mordant Solution is used to remove the salts produced by galvanised steel or zinc surfaces, this must be done before painting new galvanised steel
- T Wash will improve adhesion of coating systems
- This Mordant Solution can be used on zinc and galvanised substrates such as hand railings, piping, lighting columns and structural steel
- Teamac T Wash produces an etched surface on galvanised steel and zinc surfaces
Technical Info
| Components: | One Part |
| Type: | Mordant Solution |
| Finish: | - |
| Stock Colours: | Blue solution turning grey after application |
| Tintable: | No |
| VOC Content: | 325.0g per Litre |
| Volume Solids: | - |
| Suitable Substrates: | For clean zinc surfaces |
| Application Method: | Brush, Dip or Roller |
| Theoretical Coverage: | 40m2 per litre |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | - |
| Overcoatable: | - |
| Fully Cured: | - |
| Cleaner / Thinner: | Water |
| Shelf Life: | 2 years unopened in original packaging |
| Packaging: | Available in 2.5 Litres |
