£7.50 delivery on orders excluding certain products & postcodes *
Teamac Metalcote Machinery Enamel is an anti corrosive enamel that gives maximum durability to metal surfaces.
With quick drying time, Teamac Metalcote Machinery Enamel offers you fast results where you can get back to work in no time. Teamac Metalcote Machinery Enamel offers heat and oil resistance to machinery and resists temperatures up to 150°C. With dozens of colours available, Teamac Metalcote Machinery Enamel can be used solely for the purpose of re-decorating your tractor or historic structure/building.
Teamac Metalcote Machinery Enamel can be applied using spray or brush to produce a high gloss finish. Use spray for larger areas and brush for trickier areas which require more precision. For every litre of Teamac Metalcote Machinery Enamel that is used 11m2 is covered.
Teamac Metalcote Machinery Enamel is designed for a whole range of different surfaces and environments including most woods and metals and is designed to withstand all kinds of different weathers with ultra strong resistance to rain, wind and sunlight.
Components: | One Part |
Type: | Enamel |
Finish: | Gloss |
Stock Colours: | See colour card |
Tintable: | Yes, to RAL and BS colours. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 550.0g per Litre |
Volume Solids: | 35% |
Suitable Substrates: | For metal machinery such as tractors |
Application Method: | Brush, Roller or Airless Spray |
Theoretical Coverage: | 12 m2 per litre at 35 microns |
Wet Film Thickness (WFT): | 85 microns |
Dry Film Thickness (DFT): | 35 - 40 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | After 8 hours at 20°C |
Fully Cured: | 3 - 5 days at 20°C |
Cleaner / Thinner: | Teamac Thinner 14 |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 2.5 and 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.