Teamac Zinc Rich Cathodic Protection for Metal used for providing protection to steel and iron and has been formulated to resist weather damage and UV light.
Teamac Zinc Rich Cathodic Protection for Metal is a metal priming product designed for use on a variety of different substrates to aid the adherence of other over coating products. Teamac Zinc Rich Cathodic Protection for Metal is available in matt grey finish in 1 and 2.5 litre containers, offering a cost effect cathodic solution.
Teamac Zinc Rich Cathodic Protection for Metal is best used for providing protection to steel and iron and works excellently well at protecting against weather damage, UV light and general abrasion in light to medium industrial environments. Teamac Zinc Rich Cathodic Protection for Metal can also be used as a form of cold galvanising.
Teamac Zinc Rich Cathodic Protection for Metal can be applied easily using brush or roller and produces a high quality finish ready for use on all types of metal substrates.
Surface and Environment
Teamac Zinc Rich Cathodic Protection Metal Primer, can be used on all metal surfaces externally and internally, including, zinc, aluminium, iron and bare, rusted or galvanised steel.
- Teamac Zinc Rich Primer contains a very high concentration of metallic zinc
- The zinc coating in Teamac Zinc Rich Primer gives cathodic protection to the metal
- Teamac Zinc Rich Primer offers a form of cold galvanising
|VOC Content:||381.0g per Litre|
|Suitable Substrates:||For iron and steel as protection against corrosion|
|Application Method:||Brush or Airless Spray|
|Theoretical Coverage:||8 m2 per litre at 70 microns|
|Wet Film Thickness (WFT):||125 microns|
|Dry Film Thickness (DFT):||70 microns|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 8 hours at 20°C|
|Cleaner / Thinner:||Teamac Thinner 15 or Teamac Thinner 16|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 1 and 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.