£7.50 delivery on orders excluding certain products & postcodes *
Teamac P101 Polyurethane Hull Paint is a 2 pack polyurethane paint for Boats and Boat Hulls, a high gloss light stable aliphatic polyurethane which will not fade or yellow when exposed to high levels of ultraviolet light. Teamac P101 Polyurethane Hull Paint is part of Promain's extensive range of Marine Gloss Paints that can provide boats and boat hulls with a decorative, protective finish. Once applied, Teamac P101 Polyurethane Hull Paint can be easily cleaned of surface contaminants.
P101 Polyurethane Hull Paint is ideally suited for use in the marine environment where boats need to remain aesthetically pleasing on the eye and the growth of fungi and algae needs to be destroyed. Teamac P101 Polyurethane Hull Paint will not allow fungus to grow and will work to prevent barnacles attaching themselves to the hulls of the boat also.
P101 Polyurethane Hull Paint can be used over compatible water based paints and should not be used over solvent based paints where possible. Apply Teamac P101 Polyurethane Hull Paint using brush, roller or spray for the desired effect in a choice of colours. Teamac P101 Polyurethane Hull Marine Gloss is available in 5 Kg tubs and has an excellent coverage rate of 30-35m2 per tin, per coat.
P101 Polyurethane Hull Paint has been specifically designed for the outdoor environment in different aspects of the marine world and works well to protect surfaces against the effects of UV light whilst remaining waterproof. Use Teamac P101 Polyurethane Hull Paint Marine Gloss on GRP, Wood, Ferro Concrete and suitable primed metals.
Components: | Two Part |
Type: | Aliphatic Polyurethane |
Finish: | Gloss |
Stock Colours: | Multiple colours |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 498.0g per Litre |
Volume Solids: | 47% |
Suitable Substrates: | For bridges, statues, walls, toilets and more |
Application Method: | Brush, Short Haired Mohair Roller or Airless Spray |
Theoretical Coverage: | 35 - 40 m2 per 5 Kg pack at 75 microns |
Wet Film Thickness (WFT): | 120 - 135 microns |
Dry Film Thickness (DFT): | 65 - 75 microns |
Induction Time: | - |
Pot Life: | 6 - 8 hours at 20°C |
Touch Dry: | 3 - 4 hours at 20°C |
Overcoatable: | After 16 hours at 20°C |
Fully Cured: | 5 - 7 days at 20°C |
Cleaner / Thinner: | Do not thin |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 5 Kg |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.