Coo-Var Yacht and Seaplane Varnish is a high build gloss varnish for suitably prepared and sealed timber.
This Yacht and Seaplane Varnish is a high quality, clear, modified alkyd varnish, suitable for use to offer resistance to wooden surfaces in the marine world.
PROMAIN ARE DELIGHTED TO MAKE A DONATION TO THE ROYAL NATIONAL LIFEBOAT INSTITUTION FOR EVERY TIN OF COO-VAR YACHT VARNISH ORDERED THROUGH US.
Coo-Var Yacht and Seaplane Varnish is best used on wooden boat and yacht surfaces that require a UV resistant finish with an element of water resistance too. Coo-Var Yacht and Seaplane Varnish can be used to provide excellent protection and a great gloss finish to existing paintwork. After a period of time, decking can become worn out due to exposure to sunlight and the harsh conditions that marine life offers. Yacht and Seaplane Varnish is an ideal solution to this problem.
Coo-Var Yacht and Seaplane Varnish is a Marine Varnish that should be applied using brush, roller or airless spray. Always make sure surfaces and dry and clean before applying any kind of paint or varnish. Coo-Var Yacht and Seaplane Varnish only takes 6 hours to be touch dry and is hard dry after approximately 24 hours. This product can be thinned using Thinners 14.
Teamac Yacht and Seaplane Varnish can be used over existing paintwork to increase gloss finish. Teamac V601/27 Yacht and Seaplane Varnish has been designed for use on different marine buildings, structures and features and is extremely suitable for use on yacht woodwork, doors, gates, fascias and wooden garage doors. Teamac V601/27 Yacht and Seaplane Varnish can be used inside and outside.
- Coo-Var Yacht and Seaplane Varnish is a high build gloss varnish for suitably prepared and sealed timber
- This product is a high quality clear modified alykd marine varnish for use on all wooden boat and yacht surfaces where aUV resistant finish is required
- Coo-Var Yacht and Seaplane Varnish can also be used to give protection and a higher gloss finish to existing paintwork
|VOC Content:||393.0g per Litre|
|Suitable Substrates:||For interior and exterior wood|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||14 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||70 microns|
|Dry Film Thickness (DFT):||30 - 35 microns|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||After 12 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinner 14|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.