Linitop Acryl Vernis

Non Hazardous
A varnish enriched with polyurethane resin that is odourless, colourless, protective and decorative water based varnish for interior wood.
Available in 0.25L and 0.75 Litres
From £15.67 £13.06
In stock
Only %1 left
Product Description

Linitop Acryl Vernis is a varnish enriched with polyurethane resin that is odourless, colourless, protective and decorative water based varnish for interior wood.

Best Uses

Linitop Acryl Vernis is recommended for interior wood surfaces where a washable, resistant to abrasion, scratches and water surface is required. Available in deep matt, satin and gloss finishes, this product will enhance the natural beauty of furniture and panelling without yellowing. Suitable for internal furniture, window frames, banisters, kitchen cupboards, wooden doors, wood panelling, wood in bathrooms and wetrooms. Linitop Acryl Vernis can also be applied with Linitop Acryl Prim as a coloured wood stain beneath.

  • Decorates, waterproofs the wood and enhances its natural beauty
  • Perfectly resistant to abrasion, scratches, water. Ideal for wet rooms such as bathrooms
  • Ensures optimum protection of the surface
  • Superb finish, including when applied with a brush or roller
  • Easy to apply. Excellent flow and application properties
  • Beautiful highly decorative finish
  • Can be applied to old, clean, well-adhered and roughened varnish
  • Does not yellow
  • Excellent flexibility of the film. Washable
  • Odourless. Fast-drying
  • Available in deep matt, satin or gloss
  • Colourless. Preserves the natural colour of the wood


Linitop Acryl Vernis can be applied to old, clean, well adhered and roughened varnish via a brush or microfibre roller. Apply in the direction of the grain, criss crossing passes to even out. On bare wood dilute the first coat with 10% water. The product can be recoated after 6 hours.

Technical Details
Components: Single Pack
Type: Modified Polyurethane Acrylic
Finish: Matt, Satin or Gloss
Stock Colours: Colourless
Tintable: No
VOC Content: 130 g/L
Volume Solids: 33%
Suitable Substrates: Indoor wood only
Application Method: Brush, Microfibre Roller or Spray
Theoretical Coverage: 12 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Dust Dry: 1 hour at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured:
Cleaner / Thinner: Clean tools with water immediately after use
Shelf Life: At least 2 years minimum in original unopened containers.
Packaging: Available in 250ml and 750ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products