Linitop Primer and Finish is perfect for staining sheds and summerhouses, priming wood before using another wood stain if required, protecting wood subject to movement, achieving a fungicidal protection and more.
Suitable as a coloured base for other Linitop stains and varnishes, this product includes both primer and finish in one 3 coat system by impregnating the wood. Linitop Primer and Finish wood stain has 3 main functions – its primary use is as a standalone protective wood stain with a 3-coat application system. Additionally, it can be used as a coloured primer for Linitop Classic. This will give a deeper and more rich coloured finish than using Linitop Classic alone. Finally, you can also use Linitop Primer and Finish as a coloured base for clear varnishes such as Linitop Yacht Vernis. In this case you would use a single coat of Primer and Finish, followed by 2 coats of the varnish.
Always apply Linitop Primer and Finish in the direction of the wood grain. On new wood or bare wood it is recommended that an insecticide, fungicide and anti-blue stain agent is used prior to application. If using Linitop Primer and Finish as a coloured base coat before another finish apply a single coat first. Without sanding follow with 2 coats of your chosen finish, sanding in-between the two coats.
|Finish:||Satin / Matt|
|VOC Content:||485 g/L|
|Suitable Substrates:||For outdoor wood|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||14 - 18 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Dust Dry:||6 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Cleaner / Thinner:||Clean tools with white spirit|
|Shelf Life:||At least 2 years in the unused closed original packaging|
|Packaging:||Available in 1, 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.