Linitop Yacht Vernis

SKU
id11417
Non Hazardous
A colourless, protective water resistant marine varnish with UV protection available in a satin or gloss finish.
Available in 0.25, 0.75 and 2.5 Litres
From £12.80 £10.67
In stock
Only %1 left
Product Description

Linitop Yacht Vernis is a colourless, protective water resistant marine varnish with UV protection available in a satin or gloss finish.

Formulated for use in harsh and humid environments, Linitop Yacht Vernis maintains and enhances wood's natural beauty and provides excellent UV and bad weather resistance while being highly flexible to prevent peeling and flaking.

Best Uses

Linitop Yacht Vernis is perfect for protecting and enhancing wooden boat hulls and decorating hand rails, keeping wood in damp rooms such as wetrooms in optimum condition, or waterproofing and providing UV protection to wood out in the elements.

  • Decorates and waterproofs the wood. Protects it from UV
  • Provides optimum protection of surfaces subject to intense and difficult climatic conditions
  • Resists in particular various types of bad weather: fog, snow, rain, seawater
  • Ideal for rooms subject to a lot of moisture (bathrooms) or for boats
  • Enriched with flexible alkyd resins to resist the dimensional variations of the wood
  • Easy to apply. Excellent brushing, flow and application properties
  • Does not blister or flake. Washable
  • Available in satin and gloss
  • Colourless. Preserves the natural appearance of the wood

Application

Apply using a short mohair roller in the direction of the woodgrain. Fill any surface imperfections prior if neccessary. If you require a coloured finish, first apply a coat of Linitop Primer and Finish according to the datasheets. Finish with 2 coats of Linitop Yacht Vernis after. For the first coat dilute with white spirit between 5 and 10%. Follow data sheet instructions.

Technical Details
Components: Single Pack
Type: Varnish
Finish: Gloss and Satin
Stock Colours: Colourless
Tintable: No
VOC Content: 400 g/L
Volume Solids: 58%
Suitable Substrates: For marine wood
Application Method: Brush, Roller or Spray
Theoretical Coverage: 18 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Dust Dry: 5 hours at 20°C
Overcoatable: After 24 hours at 20°C
Fully Cured:
Cleaner / Thinner: Clean tools with white spirit
Shelf Life: At least 2 years in the closed original packaging
Packaging: Available in 250ml, 750ml and 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use