Linitop Grain Filler

SKU
id12657
Non Hazardous
A clear, semi gloss wood grain filler formulated to fill small surface imperfections in wood prior to application of a suitable top varnish.
Available in 0.75 and 2.5 Litres
From £24.18 £20.15
In stock
Only %1 left
Product Description

Linitop Grain Filler (Bouche-Pores) is a clear, semi gloss wood grain filler formulated to fill small surface imperfections in wood prior to application of a suitable top varnish.

Best Uses

With exceptional filling properties Linitop Grain Filler can be applied to new wood on top of Linitop Vernis or on old varnish in a good condition to fill imperfections. Linitop Grain Filler is perfect for achieving an ultra smooth finish on interior woodwork, reviving old varnish in good condition or renovating resinous woods, broadleaved woods and tropical hard woods.

Application

Never apply Linitop Grain Filler directly to bare wood but only after a first coat of Linitop Vernis. Work in well ventilated rooms using rubber gloves, a mask and suitable glasses. Linitop Grain Filler can be used straight from the tin.

Technical Details
Components: Single Pack
Type: Urethane Alkyd
Finish: -
Stock Colours: Transparent
Tintable: No
VOC Content: 400 g/L
Volume Solids: 58%
Suitable Substrates: For interior woodwork
Application Method: Brush
Theoretical Coverage: 10 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Dust Dry: 4 - 5 hours at 20°C
Overcoatable: Between 24 and 48 hours at 20°C
Fully Cured:
Cleaner / Thinner: Clean tools with white spirit
Shelf Life: At least 2 years in the unused closed original packaging. Close the packaging well after use.
Packaging: Available in 750ml and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use