Owatrol Deks Olje D2 High Gloss Wood Finish

SKU
id3688
Non Hazardous
A high gloss wood finish oil for external and internal use on new and old timber.
Available in 1, 2.5 and 20 Litres
From £33.43 £27.86
In stock
Only %1 left
Product Description

Deks Olje D2 is a high gloss wood finish oil for external and internal use on new wood and old timber.

Owatrol Deks Olje D2 High Gloss Wood Finish Varnish is designed for use externally and internally on old and new wood. Owatrol Deks Olje D2 High Gloss Wood Finish is manufactured especially for use on woods already treated with Deks Olje D1. Owatrol Deks Olje D2 High Gloss Wood Finish is used to provide wooden substrates with a high glossy surface that gets better with every coat applied, at least 3 coats should be applied for the best performance.

Best Uses

Owatrol Deks Olje D2 High Gloss Wood Finish Varnish is a proven marine product suitable for use on boats, above the waterline, garden furniture, doors and windows, to name a few and can be used internally on a range of different surfaces too. Owatrol Deks Olje D2 High Gloss Wood Finish provides surfaces with a tough, durable and flexible finish that is easy to maintain. Unlike traditional varnishes D2 will not craze or blister and because of D1s penetrating qualities will not peel or flake as water is unable to get into the wood where it can also cause unsightly stains.

Application

Owatrol Deks Olje D2 High Gloss Wood Finish Varnish can be applied using brush or roller and has a theoretical coverage rate of 15m2 per litre, per coat. Owatrol Deks Olje D2 High Gloss Wood Finish is a high quality varnish brought to you by Owatrol, and has a drying time of 12 hours before the second coat can be applied. Please allow 3-4 days after the product has been applied before using the surface in question.

Surface and Environment

Owatrol Deks Olje D2 High Gloss Wood Finish Varnish can be used on all marine applications above the water line and offers a high gloss finish that can be used on a selection of different surfaces, including, teak, ipe, bovinga, bolondo, iroco and timber. Owatrol Deks Olje D2 High Gloss Wood Finish has a light and resistant films that will not crack, peel or blister when exposed to UV light. Owatrol Deks Olje D2 High Gloss Wood Finish can be used on things like garden furniture, fences and stairs as well as boats, which is the recommended use.

Technical Details

Features

  • A High Gloss Finish for Boats, Garden Furniture, Decking, Parquet Flooring etc
  • For use on woods pre-treated with DEKS OLJE D1 (or OWATROL OIL or XYLKOTE interior oil)
  • Suitable for Hardwoods and exotic tropical woods such as teak, ipe, bovinga, bolondo and iroco
  • High gloss, very durable finish (Can be slippery so not recommended for walkways.)
  • Light and resistant film that avoids peeling, scaling, cracking or blistering
  • Flexible finish (like varnish) which does not hide the wood grain
  • Owatrol Deks Olje D2 Wood Finish Application
  • Apply 3 to 6 coats

Technical Info

Components: Single Pack
Type: Solvent Based
Finish: Gloss
Stock Colours: Amber
Tintable: No
VOC Content: This product contains max. 399 g/L
Volume Solids: 56% ± 5
Suitable Substrates: Hardwoods, softwoods, new or weathered wood, marine - all applications above the waterline
Application Method: Brush, Roller, Airless Spray or Air-Atomised Spray
Theoretical Coverage: 15 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 12-24 hours per coat, depending on temperature and humidity
Overcoatable: Apply 6 coats of DEKS OLJE® D.2 allowing a minimum of 12 hours between coats.
Fully Cured: Allow 3 days for DEKS OLJE® D.2 to set-up and dry, before putting the boat in service.
Cleaner / Thinner: Do not thin. Clean all tools and equipment with white spirits while still wet
Shelf Life: 2 years from date of production unopened
Packaging: Available in 1 Litre 2.5 Litres and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use