Owatrol Oil for Rusted Surfaces has a penetrating rust inhibitor that stops rust from building up and protects the base metal from the potential of further rusting.
Owatrol Oil for Rusted Surfaces is a versatile, highly penetrating air drying oil (metal primer) that can be used alone or added to paint. Used alone it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust. Filling dry porous wood to stop paint peeling. Added to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times.
Owatrol Oil for Rusted Surfaces has a penetrating rust inhibitor that stops rust from building up and protects the base metal from the potential of further rusting. It works by penetrating right down to the sound metal and drives out moisture and air before stabilising. Owatrol Oil for Rusted Surfaces removes oil, stops it from coming back all the while maintaining the natural appearance of the surface, primarily metal.
Owatrol Oil is also suitable for use with solvent based paints to give a smoother finish. Contact our technical team for more info.
Owatrol Oil for Rusted Surfaces can be applied using brush, roller or airless spray, and works well with HVLP sprayers and garden/pump sprayers too. After 12 hours Owatrol Oil for Rusted Surfaces will be touch dry and ready for a recoating after 24-48 hours. Owatrol Oil for Rusted Surfaces offers heat resistance of up to 15°C making it an ideal product to be used in construction or workshop environments where heat build up can often occur. Owatrol Oil is available in 500ml, 1 litre, 5 litres and 20 litres for larger rust removal jobs.
Surface and Environment
Owatrol Oil for Rusted Surfaces offers adhesion enhancement and can be used as an ideal foundation for primers or finishing coats. Owatrol Oil for Rusted Surfaces has excellent viscosity meaning it can be applied and used in all kinds of different weather conditions, including, wind, rain and hot conditions. Owatrol Oil for Rusted Surfaces is designed primarily for use on metal surfaces that are prone to rust build up and work excellently towards protecting the metal parts.
Owatrol Oil is a versatile, highly penetrating air drying oil that can be used alone or added to paint. Used alone it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust. Filling dry porous wood to stop paint peeling. Added to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times.
- Penetrating rust inhibitor
- Stops rust and protects the base metal from further rusting
- Penetrates and protects down to the sound metal
- Drives out moisture and air and stabilises
- Leaves a bonding film on all surfaces
- Excellent adhesion including on galva, alu, zinc, wood ...
- Maintains the natural look of the surface (metal, wood, etc.)
- Enhanced adhesion, ideal foundation for primers or finishing coats
- Allows paint to be applied direct to firm rust
- Heat resistance up to +175°C.
- Paint Conditioner
- Makes alkyd paint rust inhibiting
- Improved paint flow and workability
- Better viscosity which allows painting to be carried out in cold, warm or windy conditions
- Replaces damaging thinners; improves hiding power of paint
- Wood impregnation
- Deeply penetrates and seals wood
- Protects metal parts.
|VOC Content:||750 g/L|
|Volume Solids:||49% ± 2|
|Suitable Substrates:||Steel structures, railings, pipes, grills, stairs, machinery, engine parts, trailers, all Wood surfaces, dry or porous|
|Application Method:||Brush, Roller, Airless or HVLP sprayer, Graden/Pump sprayer|
|Theoretical Coverage:||18 m2 per litre. Coverage will vary depending on type, texture and porosity of surface plus application method|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||12 hours at 20°C|
|Overcoatable:||After 24-48 hours at 20°C|
|Fully Cured:||24 hours at 20°C|
|Cleaner / Thinner:||Clean all tools and equipment with white (mineral) sprits while still wet|
|Shelf Life:||2 years minimum in original unopened packaging|
|Packaging:||Available in 300ml Spray, 500ml, 1, 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.