Jotun Hardtop AX is a two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resistance.
Jotun Hardtop AX is a two component chemically curing aliphatic acrylic polyurethane coating. It offers a high gloss finish that provides very good gloss retention for many years and will not suffer from UV degradation to the degree that many top coats do. It also provides good chemical resistance to most common chemicals.
Jotun Hardtop AX is the latest addition to the Jotun range of high performance paint coatings and is available in most BS 4800, BS 381C and RAL Colours. Especially formulated to offer an ever greater degree of corrosion protection to steel that is subject to harsh environments and comply with the demands for lower levels of VOC.
Jotun Hardtop AX should be applied using conventional spray or airless spray, although can be applied by brush or roller if extra care is taken to achieve the specified dry film thickness. Surfaces must be free from dirt and contamination and cleaned to the highest standard prior to application which will ensure the best possible adhesion.
Surface and Environment
Jotun Hardcoat AX is ideally suited as a high gloss topcoat to be applied as part of a standard specification for sea going ships and inland crafts such as canal boats and barges to be applied over Jotun Jotamastic 87 Aluminium and Jotun Jotamastic 87 standard 2 pack epoxy coatings. A high solids paint coating providing a good film build, Jotun Hardtop AX is formulated to be used as topcoat in atmospheric environments. Hardtop AX is an excellent top coat for boats and ships, for inland waterways, as well as coastal and sea going vessels.
- Used as a topcoat in pre-qualified NORSOK systems
- HAPAS approved to specification 2911
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
|Type:||Chemically curing aliphatic acrylic polyurethane coating.|
|Stock Colours:||-White and Black|
|Tintable:||Yes, to RAL and BS Colours. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||330.0g per litre|
|Suitable Substrates:||Compatible previous coatings|
|Application Method:||Air Spray, Airless Spray, Brush or Roller|
|Theoretical Coverage:||13 - 6.3m2 per litre|
|Wet Film Thickness (WFT):||80 - 160 microns|
|Dry Film Thickness (DFT):||50 - 100 microns|
|Pot Life:||2 hours at 23°C|
|Touch Dry:||2 hours at 10°C|
|Overcoatable:||10 hours at 10°C|
|Fully Cured:||10 days at 10°C|
|Cleaner / Thinner:||Jotun Thinner No. 26 and Jotun Thinner No. 10|
|Shelf Life:||48 months|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.