Sikacor EG5 is for use by experienced professionals only. It is to be used in combination with 2-pack primer and intermediate coats of the SikaCor® and Sika® Permacor® product range for heavy-duty corrosion protection of steel structures. Also suitable for line marking on Sikafloor® resins and for submerged steel.
By adding 1 % b.w. SikaCor® PUR Accelerator (see product data sheet for more information) a fast touch and thorough drying will be achieved. Approved to German standard TL/TP-KOR-Stahlbauten.
Blast cleaning to Sa 2 ½ according to ISO 12944, part 4. Free from dirt, oil and grease.
Galvanized steel, stainless steel and aluminium:
Free from dirt, oil, grease and corrosion products. In case of permanent immersion and condensation the surfaces must be slightly sweep blasted with non-ferrous abrasives.
For contaminated surfaces e.g. galvanized or primed areas we recommend cleaning with SikaCor® Wash.
The method of application has a major effect on achieving uniform thickness and appearance. Spray application will give the best results. The indicated dry film thickness is easily achieved by airless spray. Adding solvents reduces the sag resistance and the dry film thickness. In case of application by roller or brush, additional applications may become necessary to achieve the required coating thickness, depending on type of construction, site conditions, colour shade etc. Prior to major coating operations a test application on site may be useful to ensure the selected application method will provide the requested results.
Combined with 2-pack epoxy primer and intermediate coats:
|Type:||Acrylic Polyurethane Top Coat|
|Stock Colours:||RAL 1023, RAL 3020, RAL 5010, RAL 6029, RAL 7011, RAL 7036, RAL 7037, RAL 7038, RAL 9005 and RAL 9010|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||< 500 g/l|
|Suitable Substrates:||Steel, Galvanised Steel, Stainless Steel and Aluminium|
|Application Method:||Brush, Roller, Airless Spray or Conventional High Pressure Spray|
|Theoretical Coverage:||0.130 kg/m² / 0.170 kg/m²|
|Wet Film Thickness (WFT):||100 μm / 130 μm|
|Dry Film Thickness (DFT):||60 μm / 80 μm|
|Pot Life:||5 hours at 20°C or 3 hours by adding 1% b.w. SikaCor PUR Accelerator|
|Touch Dry:||14 hours at 20°C with dry film thickness 80 μm|
|Overcoatable:||Minimum of 14 hours at 20°C|
|Fully Cured:||1-2 weeks depending on film thickness and temperature|
|Cleaner / Thinner:||Sika® Thinner EG - Clean tools with SikaCor® Cleaner|
|Shelf Life:||2 years from date of production unopened|
|Packaging:||Available in 3kg and 10kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.