C3 Environments

C3 Environments externally typically consist of urban and industrial atmospheres with moderate sulfer dioxide pollution and coastal areas with low salinity. Internally, typical environments include production rooms with high humidity and some air pollution. Examples include food processing plants, laundries, breweries and diaries.

 

Scroll to the bottom of this page for a full list of suppliers and their specifications.


Download the manufacturer specifications for steel systems below:

Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teamac | Teknos
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Manufacturer PPG Remove This Item
Filter by

4 Items

Set Descending Direction
  1. PPG SigmaCover 410 MIO
    PPG SigmaCover 410 MIO

    Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

    From £324.00 £270.00
  2. PPG PSX 700 Engineered Siloxane
    PPG PSX 700 Engineered Siloxane

    For steel from PPG Sigma, Ameron. Highways Approved Item No.185.

    From £373.15 £310.96
  3. PPG SigmaFast 278
    PPG SigmaFast 278

    A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

    From £73.06 £60.88
  4. PPG SigmaDur 550 H
    PPG SigmaDur 550 H

    Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

    From £69.60 £58.00
per page