Selemix 7-110 Acrylic 2 Pack Topcoat is formulated with acrylic enamel for a very high gloss finish, excellent colour fastness and resistance to atmospheric attack.
Please note, the Hardener is not included with this product. Compatible Hardener is Selemix Hardener 9-080.
Selemix 7-110 Acrylic 2 Pack Topcoat is perfect for application on ferrous metal, bare steel, cars, truck, agricultural equipment, tractors, ploughs, plant equipment, screed pumps, rollers, earth movers, workshop equipment, garages doors, roller shutters, light industrial equipment plus many more.
Selemix 7-110 Acrylic 2 Pack Topcoat is part of the Selemix range of 2 part spray applied coatings. Due to is formulation the product with provide excellent gloss level and can also be supplied in metallic gloss colours, as well as any RAL, BS or NCS Colour codes. When used with the correct primer, Selemix 7-110 will prevent and resist corrosion caused by atmospheric attack. Selemix 7-110 is made of an acrylic enamel meaning is has a very high gloss finish and provides good levels colourfastness. The product is also fast drying and can touch dry is as little as 30-40 mins in the right conditions saving both costs, labour and downtime.
When being used in the applicable Selemix system, Selemix 7-110 is ideal for application onto bare steel, phosphated steel or on previously applied coatings, suitable for airport ground support equipment, cars, truck, workshop machines, electrical generator cabins and general engineering equipment, agricultural and construction equipment such as excavators, earthmovers, screed pumps, dumpers, tractor, harvesters, plus many more.
Selemix 7-110 will need to mixed in the correct ratio with Selemix Hardener 9-080 prior to application at a general ratio of 4 to 1, please check attached datasheet prior to mixing for the applicable ratio.
Always consult technical data sheet prior to use
- ISO 12944-6
|Tintable:||Tintable to metallic gloss colours, as well as any RAL, BS or NCS colour codes. Please note, bespoke tints are non refundable / exchangable.|
|Suitable Substrates:||Selemix 2K Epoxy Primers / Selemix 2K Epoxy Vinyl Primers, Old Finishes or Polyurethane and polyester fillers.|
|Compatible Primers:||Selemix 7-413 2 Pack Epoxy Primer, Selemix 7-414 2 Pack Epoxy Vinyl Primer.|
|Compatible Thinners:||Selemix 1-430 Acrylic Thinner, Selemix Thinner 1-470|
|Compatible Hardeners:||Selemix Hardener 9-080.|
|Application Method:||Airless and conventional spray equipment.|
|Theoretical Coverage:||7.6 - 8.8m2 per litre ready to spray giving a 40 micron thickness.|
|Recommended Dry Film Thickness (DFT):||50 microns per coat.|
|Drying Time:||30-40 minutes at 60°C.|
|Overcoat Time:||Always possible after sanding.|
|Packaging:||5 Litre tins.|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.