£7.75 delivery on orders excluding certain products & postcodes *
C3 Environments externally typically consist of urban and industrial atmospheres with moderate sulfer dioxide pollution and coastal areas with low salinity. Internally, typical environments include production rooms with high humidity and some air pollution. Examples include food processing plants, laundries, breweries and diaries.
Scroll to the bottom of this page for a full list of suppliers and their specifications.
Carboline | Hempel | International | Jotun | PPG | Selemix | Sherwin Williams | Sika | Teamac | Teknos
Guide To Working In Confined Spaces
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...
An extreme performance pipeline coating for hot, cryogenic and cycling exposures.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A 2K high build epoxy primer containing anticorrosive pigments.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A tough, hard wearing finish coat for application over properly primed surfaces.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
A 2 pack primer offering excellent adhesion and protection properties for steel in the harshest of environments up to C5M-low.
A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.
A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
A very high gloss, excellent colour fast and resistance to atmospheric attack product, available in RAL, BS 4800 or NCS Colours.
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.