Fosroc Paveroc

Non Hazardous
A high performance reinstatement mortar for concrete pavements and floors. Conforms to BS EN 1504-3 Class R4.
Available in 20x 25 Kg bags (1/2 Pallet) and 40x 25 Kg bags (Full pallet)
From £655.68 £546.40
In stock
Only %1 left
Product Description

Fosroc Paveroc is a high performance reinstatement mortar for concrete pavements and floors conforming to the requirements of BS EN 1504-3 Class R4.

Best Uses

Fosroc Paveroc is formulated for the reinstatement or resurfacing of large areas of concrete pavements, ramps and floors to avoid the full depth replacement of bays.
It may be used internally and externally including areas subject to heavy trafficking.

Paveroc can be used in conjunction with Fosroc Hardtop S for the repair of floors with a dry shake floor surfacing. Paveroc is suitable for repair methods 3.1, 3.2, 4.4, 7.1, 7.2 as defined by BS EN 1504-3.

  • Long open time - applicable to large bay areas
  • High strength, abrasion and weather resistance
  • One component, pre-bagged to overcome site-batched variations requires only the site addition of clean water
  • Excellent bond to the concrete substrate
  • Shrinkage compensated
  • Contains no chloride admixtures

Paveroc is designed for horizontal use. It may be applied up to a maximum thickness of 100 mm. Thicker sections can be built up in layers. Material should not be applied at less than 12 mm thickness. Individual bay sizes should not exceed 18 m2.

Technical Details


  • Paveroc complies with the classification R4 according to EN1504-3, repair methods 3.1, 3.2,4.4, 7.1 and 7.2
  • Paveroc complies with LU Standard 1-085 ‘Fire Safety Performance of Materials’

Technical Info

Components: Single Pack
Type: Mortar
Stock Colours: Grey
Tintable: No
Application Method: Trowel and Tamper
Theoretical Coverage: Approximately 11.5 Litres / 25 Kg bag (approximately 0.9 m2 at 12 mm thickness)
Water Addition Per Bag: For normal applications, place 1.9 to 2.2 litres of drinking quality water into the mixer.
Compressive Strength:

EN 12190:1999. Class R4 > 45 MPa.

1 Day at 20°C = 20 MPa
7 Days at 20°C = 45 MPa
28 Days at 20°C = 65 MPa

Minimum Thickness: 12mm
Maximum Thickness: 100mm
Cleaner / Thinner: Paveroc should be removed from tools, equipment and mixers with clean water immediately after use. Cured material can only be removed mechanically.
Shelf Life: 12 months from the date of manufacture if kept in dry storage in the original, unopened bags. If stored at high temperatures and / or high humidity the shelf life may be reduced to less than 6 months.
Packaging: Available in 20x 25 Kg bags (1/2 Pallet) and 40x 25 Kg bags (Full pallet)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use