Centrecoat Anti Slip Tape Edge Fix Adhesive can be used in conjunction with all common anti slip tapes to ensure the edges are properly adhered to the substrate.
Centrecoat Anti Slip Tape Edge Fix Adhesive can be applied simply and effectively to provide a quality solution that makes sure edges will not lift up when exposed to trafficking or wet conditions.
Centrecoat Anti Slip Tape Edge Fix Adhesive can be applied simply by running the adhesive sealer along the edges of Anti Slip Tapes and is an ultra strength product that provides a long term solution for edge sealing.
Surface and Environment
Centrecoat Anti Slip Tape Edge Fix Adhesive can be used in all internal and external environments where Anti Slip Tape has been applied or prior to application that only needs a small amount to ensure maximum adhesion on wooden, metal and most other substrates.
- Edge fix helps to prevent the lifting of the anti-slip tape in high traffic areas
- Simply apply the sealant in a very small bead down the side of the tape using the narrow nozzle built into the tube
- It helps to secure the product and extend its life
- A 140ml tube will seal up to 35 linear metres
- Available in 140ml Tubes
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.