Direct Pro responds to the industry's evolving expectations for faster curing and shorter process times as well as increased performance while at the same time reducing emissions which therefore gives you a very efficient process.
Selemix Direct Pro has a high gloss finish, good colour and UV stability. Its good anticorrosive properties make it suitable for the finishing and protection of machinery, agricultural and construction equipment, as well as many other industrial painting applications.
Application is by Air-Assisted Airless spray or Conventional spray. Follow product data sheet. Requires incorporation of suitable thinner and hardener sold separately.
Suitable for use with:
Suitable for use with:
|Stock Colours:||Part of SELEMIX® colour system|
|Tintable:||Please contact us for information|
Conventional Spray: 367-407 g/L
Air-Assisted Airless Spray: 338-381 g/L,
Conventional Spray: 55-60%
Air-Assisted Airless Spray: 58-63%
|Suitable Substrates:||Steel (Blast Cleaned), Steel, Glavanised Steel, Aluminium, Painted Surfaces, Epoxy Primer or PU Primer|
|Application Method:||Conventional Spray or Air Assisted Airless Spray|
Conventional Spray:6.1-6.6 m2/L @ 90 microns DFT
Air-Assisted Airless Spray: 6.4-7.0 m2/L @ 90 microns DFT
|Wet Film Thickness (WFT):||150-175 microns|
|Dry Film Thickness (DFT):||90-110 microns|
Conventional Spray: 2.5 - 3 hours at 20°C
Air-Assisted Airless Spray: 1.5 - 2 hours at 20°C
|Touch Dry:||8-10 hours (or 5-6 hours with Fast Hardener)|
Minimum: When Hard Dry
Maximum: 1 month by itself without sanding
|Hard Dry:||16 hours (or 12-14 hours with Fast Hardener)|
|Cleaner / Thinner:||
1-159 Reactive Thinner for Acrylic
1-160 Slow Reactive Thinner for Acrylic
|Shelf Life:||See Tin|
|Packaging:||Available in 3.75 Kg and 15 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.