Zeroflame Treatment

Zeroflame Treatment is a clear fire protection impregnating liquid for solid wood, that leaves no visible finish for a natural appearnce. It has been tested to: BS EN 13501-1:2018

Best Uses

Zeroflame Treatment is for use on solid wood with a minium thickness greater than 12mm. It is suitable for both interior and exterior use.

• Suitable for Interior and Exterior use
• Classifies solid wood as having little or no contribution to fire
• Leaves no visible finish for a natural appearance
• Minimum thickness 12mm
• Clear transparent impregnation
• Non-corrosive
• Non-hazardous
• Odour free

Application

The substrate must be absorbent. Check that the surface to be coated is aborbant and has not been previously sealed by other coatings. If the surface has previously been painted or varnished, this will need to be removed completely by sanding back to the original surface, prior to using Zeroflame Treatment.

Zeroflame Treatment can be applied by brush, roller or spray. Test on a small area first to ensure finish is acceptable.

Where a final decorative finish is required, the substrate must be fully dry before over coating. We advise checking the moisture content of the substrate prior to application and applying top coat to manufacturer’s instructions. A small area of the substrate should be tested for compatibility before the full final coat is applied.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.