Zeroflame Upgrade
Zeroflame Upgrade is a waterborne intumescent coating, which has been designed to prevent the spread of fire on previously painted surfaces. It is intumescent coating classified to European Standard EN 13501-1.
Best Uses
Zeroflame Fire Retardant Upgrade has been successfully tested to European Standard EN13501-1, achieving B-s1, d0 on wood with a minimum thickness of 8mm, or a non-combustible substrate with a minimum thickness of 6mm, and density ≥338 kg/m³, previously coated with paint to maximum thickness of 360μm. It has a matt white finish but can be overcoated with Zeroflame Topcoat W if analternative colour or gloss level is required.
- Waterborne
- Dries to a matt white finish
- Can be overcoated with Zeroflame Topcoat W
Application
Zeroflame Upgrade can be applied by brush, roller or airless spray. Roller or airless spray are the most appropriate methods on large, flat areas.
Ensure the surface is thoroughly cleaned, dried and free from any oil, grease or dust etc. prior to application. When overcoating existing paints any evidence of delamination between exisiting coats, or between existing paint and the substrate, indicates that the surface is unsuitable for overcoating, and will therefore require all existing coatings to be removed. Existing coatings, if found to be suitable, should be thoroughly abraded and all dust and debris removed.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Certificates and Approvals
- Intumescent coating classified to European Standard EN 13501-1
- Achieves European Class B-s1, d0 on previously painted internal surfaces
Technical Info
| Components: | Single Pack |
| Type: | Waterborne |
| Finish: | Matt |
| Stock Colours: | White |
| Tintable: | No. Can be overcoated with Zeroflame Topcoat W if an alternative colour or gloss level is required. |
| VOC Content: | 31g/l |
| Volume Solids: | 70% |
| Suitable Substrates: | Wood |
| Application Method: | Brush, Roller, Airless Spray |
| Theoretical Coverage: | 2.5m²/kg, 400g/m |
| Wet Film Thickness (WFT): | 305 µm |
| Dry Film Thickness (DFT): | 215 µm |
| Induction Time: | - |
| Number of Coats: | Dependant on the application method and the standard of finish required. |
| Re-Coat: | 4 hours at 23°C |
| Top Coating: | 12 hours at 23°C |
| Cleaner / Thinner: | Do not thin. Clean all equipment with water immediately after use. |
| Shelf Life: | 12 months from date of production unopened or 'use by' date where specified |
| Packaging: | Available in 12.5 Kg |
