Bedec Stone and Brick Sealer Interior

SKU
id3705
Non Hazardous
Water based colourless sealer for interior brick and masonry surfaces.
Available in 5 Litres in Clear
£62.66 £52.22
In stock
Product Description

Bedec Stone and Brick Sealer Interior is a colourless, transparent sealer designed for use on brick and masonry surfaces internally in order to provide a weatherproofing coating that seals and protects the surface.

Best Uses

Bedec Stone and Brick Sealer Interior is best used in light industrial environments internally where the conditions can sometimes prove to be damaging to some surfaces that haven't been provided with the best protection. Bedec Stone and Brick Sealer Interior seals bricks and masonry surfaces aid the protection from weather damage.

Application

Bedec Stone and Brick Sealer Interior can be applied directly to the surface using a brush and offers a theoretical coverage rate of 13-15m2 per litre. Available in 5 litre containers for middle sized projects.

Surface and Environment

Bedec Stone and Brick Sealer Interior is designed for use in an interior environment and provides a high performance clear sealer to protect bricks from water damage.

Technical Details
  • Do not thin.
  • Allow adequate ventilation during application and drying.

Technical Info

Components: Single Pack
Type: Water Based
Finish: -
Stock Colours: Colourless
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: For use on interior brick or masonry surfaces to seal and weather proof.
Application Method: Brush
Theoretical Coverage: Approximately 6 sq. metres/litre. depending on porosity of substrate.
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Drying: 2 hours @ 18º Centigrade and 65% humidity
Overcoatable: After 4 hours
Flash Point: Not Applicable
Cleaner / Thinner: Warm Soapy Water
Storage: Keep out of reach of children. Protect from frost.
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use