Carboline Carboxane 2000 Topcoat

Part A: Non Hazardous, Part B: UN3469 (Class: 3.8, Pk Grp: III)
An advanced isocyanate free topcoat with outstanding high gloss and colour retention for exterior exposures.
Available in 5 Litres. Tintable to thousands of RAL colours.
From £205.20 £171.00
In stock
Only %1 left
Product Description

Carboline Carboxane 2000 Topcoat is an advanced isocyanate free topcoat with outstanding high gloss and colour retention for exterior exposures.

Best Uses

Carboline Carboxane 2000 Topcoat provides a high gloss surface and can be used where polyurethane coatings are not desired.

  • Exceptional weatherability
  • Long service life
  • Isocyanate free
  • Excellent abrasion resistance
  • Excellent for use in chemical industry, offshore, ships, bridges, hydropower and other heavy industry

Available in most RAL colours. Certain colours may require multiple coats to hide. Compatible with inorganic and organic zinc rich primers, epoxies and others as recommended by Carboline Technical Services / Promain's Technical Team.


Surface must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating, in accordance with SSPC-SP 1 and follow the guidelines below.

Clean and lightly sand or abrade to roughen and de-gloss the surface. Existing coating must attain a minimum 3A rating in accordance with ASTM D3359 adhesion test. Apply over clean, dry primers or intermediate coats as recommended by Carboline / our Technical Team.

Power mix part A and part B separately, then combine and power mix. DO NOT MIX PARTIAL KITS. Pot life is 4 hours at 23°C (75°F) and less at higher temperatures. Pot life ends when coating becomes too viscous to use. This product is moisture sensitive. Avoid moisture contamination.

Apply via airless spray. Use brush or roller for small, difficult to reach areas.

Technical Details
Components: Two Pack
Type: Siloxane modified multipolymer
Finish: High gloss
Stock Colours: Just tints
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 110 g/L
Volume Solids: 80%
Suitable Substrates: Previously primed substrates
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage:
  • 31.5 m2 per litre at 25 microns
  • 10.5 m2 per litre at 75 microns
  • 5.2 m2 per litre at 150 microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 76 - 152 microns per coat. Normally specified at 75 microns
Induction Time: -
Pot Life: 4 hours at 23°C
Dry To Touch: 2.5 hours at 15°C
Overcoatable: After 6 hours minimum at 15°C
Fully Cured: 8 days at 15°C
Cleaner / Thinner: May be thinned up to 15% with Carboline Thinner 10. Clean up with Use Carboline Thinner 2 or Acetone.
Shelf Life: Part A: minimum 24 months at 24°C (76°F)
Part B: minimum 24 months at 24°C (76°F) in original unopened containers.
Packaging: Available in 5 Litres

Related Products