Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat

Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.

Available in 10 Litres. Tintable upon request.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£149.07

Inc VAT £178.88

PRODUCT DETAILS

Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat is a modified epoxy phenolic, amine adduct cured high performance, immersion grade coating. Provides excellent resistance to wet/dry cycling conditions at elevated temperatures. Cures down to 5°C.

Best Uses

Carboline Thermaline 440 Topcoat Finish Formerly 400 EU Topcoat is ideal for protecting steel substrates under thermal insulation. Cures down to 5 degrees.

Unique ability to be tinted to most RAL and BS colours, unlike most heat resistant products in it's class.

Used within a system consisting of Carboline Thermaline 440 Primer and this Topcoat.

Temperature resistant up to 204°C
Very good flexibility
Excellent overall chemical resistance
High abrasion resistance
Easily applied by spray
Suitable for use over stainless steel

Application

Suitable for application via conventional or airless spray - see data sheet for tip sizes and recommendations. Brush or roller recommended for touch up, striping of weld seams and hard to reach areas only. Apply within 5 - 75°C surface temperature with 0 - 85% relative humidity. Power mix separately, then combine and power mix for a minimum of two minutes.

TECHNICAL

Features

Continuous: 204°C (399°F)
Non-Continuous: 232°C (450°F)

Components:	Two Pack
Type:	Modified Epoxy Phenolic, Amine Adduct Cured
Finish:	Semi Gloss
Stock Colours:	White and Grey
Tintable:	Yes. Please note, bespoke tints are non refundable / exchangable.
VOC Content:	310 g/L
Volume Solids:	51%
Suitable Substrates:	Steel, Stainless Steel
Application Method:	Conventional Spray, Airless Spray, Brush or Roller
Theoretical Coverage:	3.4 - 4m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	125 - 150 microns
Induction Time:	-
Pot Life:	4 hours at 24°C and less at higher temperatures. Pot life ends when coating loses body and begins to sag.
Surface Dry:
Overcoatable:	After 24 hours at 5°C, 10 hours at 10°C
Fully Cured:
Cleaner / Thinner:	Clean up with Carboline Thinner No.2. May be thinned up to 25% by volume with Carboline Thinner No2 or Carboline Thinner No33 for spray application.
Shelf Life:	2 years in original unopened containers at 24°C.
Packaging:	Available in 10 Litres