£7.75 delivery on orders excluding certain products & postcodes *
Carboline Thermaline 440 Primer Formerly 400 EU Primer
SKU
ID23728
Part A and B: UN1263 (Class: 3, Pk Grp: III)
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
Available in 10 Litres in Red
£188.40
£157.00
In stock
Product Description
Carboline Thermaline 440 Formerly 400 EU Primer is a modified epoxy phenolic, amine adduct cured high performance, immersion grade coating. Provides excellent resistance to wet/dry cycling conditions at elevated temperatures. Cures down to 5°C.
Best Uses
Carboline Thermaline 440 Formerly 400 EU Primer is ideal for protecting steel substrates under thermal insulation. Cures down to 5 degrees.
Used within a system consisting of Carboline Thermaline 440 Topcoat and this primer.
- Temperature resistant up to 204°C
- Very good flexibility
- Excellent overall chemical resistance
- High abrasion resistance
- Easily applied by spray
- Suitable for use over stainless steel
Application
Suitable for application via conventional or airless spray - see data sheet for tip sizes and recommendations. Brush or roller recommended for touch up, striping of weld seams and hard to reach areas only. Apply within 5 - 75°C surface temperature with 0 - 85% relative humidity. Power mix separately, then combine and power mix for a minimum of two minutes.
Technical Details
Features
- Continuous: 204°C (399°F)
- Non-Continuous: 232°C (450°F)
| Components: | Two Pack |
| Type: | Modified Epoxy Phenolic, Amine Adduct Cured |
| Finish: | Semi Gloss |
| Stock Colours: | Red |
| Tintable: | No |
| VOC Content: | 310 g/L |
| Volume Solids: | 55% |
| Suitable Substrates: | Steel, Stainless Steel |
| Application Method: | Conventional Spray, Airless Spray, Brush or Roller |
| Theoretical Coverage: | 3.4 - 4m2 per litre |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 125 - 150 microns |
| Induction Time: | - |
| Pot Life: | 4 hours at 24°C and less at higher temperatures. Pot life ends when coating loses body and begins to sag. |
| Surface Dry: | |
| Overcoatable: | After 24 hours at 5°C, 10 hours at 10°C |
| Fully Cured: | |
| Cleaner / Thinner: | Clean up with Carboline Thinner No.2. May be thinned up to 25% by volume with Carboline Thinner No2 or Carboline Thinner No33 for spray application. |
| Shelf Life: | 2 years in original unopened containers at 24°C. |
| Packaging: | Available in 10 Litres |
