FLAG Chlorinated Rubber Line Paint is a semi-gloss, easy to apply, paint for concrete and ferrous metals and provides a hard wearing finish.
FLAG Chlorinated Rubber Line Paint is a hard wearing Chlorinated Rubber paint for concrete and ferrous metals. It is suitable for road markings, tank lining, metal posts and manhole covers. FLAG Chlorinated Rubber Line Paint is ideal where high visibility and durability is a priority. FLAG Chlorinated Rubber Line Marking Paint is available in a choice of yellow or white colour ways and provides surfaces with a semi gloss, highly visible finish.
FLAG Chlorinated Rubber Line Paint is best used for providing surfaces with a high visibility and hard wearing coating. FLAG Chlorinated Rubber Line Paint provides a flexible finish with excellent chemical resisting properties. This Chlorinated Rubber Line Paint from FLAG is ideal for use in areas that require a strong level of chemical and water resistance.
When applying FLAG Chlorinated Rubber Line Paint the surface must be dry. It can be applied using a brush, roller or conventional and airless sprays. Once applied, FLAG Chlorinated Rubber Line Paint will be touch dry in 1-2 hours and ready for foot traffic or heavy traffic after 16 hours. FLAG Chlorinated Rubber Line Paint is available in 5 litre tins and has a coverage rate of 15 square metres per litre, achieving a theoretical coverage rate of 75 square metres per tin/per coat.
Surface and Environment
FLAG Chlorinated Rubber Line Paint is designed as a line marking paint that can be used internally or externally, for areas such as swimming pools, manhole covers and metal tanks, etc. FLAG Chlorinated Rubber Line Paint can also be used for marking road lines - demarkating areas and offering a good degree of durability. FLAG Chlorinated Rubber Line Paint can be applied to various concrete and ferrous metal surfaces, wherever Line Markings are required.
- Provides a flexible chemical resistant finish
- Available in yellow and white semi gloss finishes
- Surfaces must be dry, before application
|Stock Colours:||Yellow 10-E-53 and White|
|Tintable:||Yes, Minimum Order Quantity 200 Litres. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For interior and exterior concrete, ferrous metal, manhole covers and road surfaces|
|Application Method:||Brush, Roller, Conventional Spray or Airless Spray|
|Theoretical Coverage:||15 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||1 - 2 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Cleaner / Thinner:||Xylene|
|Shelf Life:||2 years unopened in original container|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.