£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat Water Based Line Marking Paint is a highly durable water based Line Marking for use on Asphalt, Tarmac and Concrete. With changing weather conditions and a risk of spontaneous rain showers, the drying time is less than 5 minute (at 20°C.) Centrecoat Water Based Line Marking Paint is suitable for EV Charging Points, lane lines, walkways, edge lines and centre lines on roads and carriageways, as well as symbols, legends and parking bays. Centrecoat Water Based Line Marking Paint is available in many different colours and can be purchased in 5 litre and 20 litre tubs for small or professional, larger scale jobs.
Centrecoat Water Based Line Marking Paint is best used in conjunction with the Centrecoat Line Marking Machine for accurate traffic paint line marking in various different environments.
Centrecoat Water Based Line Marking Paint is also often used to create Pride Crossings. We have a specific range of pride colours to help you achieve this popular look.
Showerproof 5 minutes after application.
Centrecoat Line Marking Paint is a fast drying traffic paint formulated specifically for airless equipment and conventional air atomized equipment and smaller lane line striping equipment with or without hand applied glass beads. After 15 minutes (at 20°C.) the product will be touch dry, reaching full cure in 2 hours, ready for foot trafficking and light vehicle traffic.
Centrecoat Water Based Line Marking Paint has been specifically designed for Road Line Marking but can be used in other areas that need areas distinguishing, such as, Electric car charging bays, lane marking, walkways, car parking spaces, roads, roadways, carriageways, airports, ports, factories, car parks, schools, playgrounds and hard sports courts.
Components: | Single Pack |
Type: | Waterborne Acrylic Resin |
Finish: | matt |
Stock Colours: | White, Black, Yellow |
Tintable: | Yes, depending on order size. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 55 g/L |
Volume Solids: | 50% Depending on colour |
Suitable Substrates: | Roads, car parks (concrete or tarmac/weathered black top), airfield runways etc. |
Application Method: | Apply with a lining machine, airless spray (tip size 11-13 thou), conventional spray with pressure pot (tip size 2.2mm), brush or roller. |
Theoretical Coverage: | 3.3 m2 per litre at 150 microns, giving approx a 45 metre line that is 75mm wide. |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 150 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 15 minutes at 20°C |
Rain Resistant: | 40 minutes at 20°C |
Traffic Ready: | 2 hours at 20°C |
Cleaner / Thinner: | Clean all equipment immediately after use with clean water and detergent |
Shelf Life: | 12 months in original unopened containers. |
Packaging: | Available in 5 and 20 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.