Centrecoat ST1 Water Based Pride Crossing Line Marking Paint

SKU
ID13583P
Non Hazardous
Water based Line Marking Paint for Asphalt, Tarmac and Concrete parking bays, EV charging, centre lines and edge lines, symbols and walkways.
Available in 5 Litres
From £69.24 £57.70
In stock
Only %1 left
Product Description

Centrecoat Fast Drying Water Based Line Marking Paint for customised pride zebra crossings.

Best Uses

Centrecoat Water Based Line Marking Paint is a highly durable water based Line Marking for use on Asphalt, Tarmac and Concrete. With changing weather conditions and a risk of spontaneous rain showers, the drying time is less than 5 minute (at 20°C.)  Centrecoat Water Based Line Marking Paint is suitable for EV Charging Points, lane lines, walkways, edge lines and centre lines on roads and carriageways, as well as symbols, legends and parking bays. 

Centrecoat Water Based Line Marking Paint is best used in conjunction with the Centrecoat Line Marking Machine for accurate traffic paint line marking in various different environments.

Centrecoat Water Based Line Marking Paint is also often used to create Pride Crossings. We have a specific range of pride colours to help you achieve this popular look.

Showerproof 5 minutes after application.

Application

Centrecoat Line Marking Paint is a fast drying traffic paint formulated specifically for airless equipment and conventional air atomized equipment and smaller lane line striping equipment with or without hand applied glass beads. After 15 minutes (at 20°C.) the product will be touch dry, reaching full cure in 2 hours, ready for foot trafficking and light vehicle traffic.

Technical Details

Slip Test

  • SRV (Slip Resistance Value): 36 Low Slip Potential
  • Wessex pendulum test. 4S (SLIDER 96) DRY

Notes

  • New asphalt and concrete should be allowed to cure for a minimum of 30 days before the application of line marking paint
  • Apply by paint brush, roller or spray
  • Rain resistant in 40 minutes
  • 18 thou tip size recommended
  • Showerproof 5 minutes after application

Technical Info

Components: Single Pack
Type: Waterborne Acrylic Resin
Finish: Matt
Stock Colours: White, Black, Yellow, Red
Tintable: Yes, depending on order size. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 55 g/L
Volume Solids: 50% Depending on colour
Suitable Substrates: Roads, car parks (concrete or tarmac/weathered black top), airfield runways etc.
Application Method: Apply with a lining machine, airless spray (tip size 11-13 thou), conventional spray with pressure pot (tip size 2.2mm), brush or roller.
Theoretical Coverage:
  • 3.3m² per litre
  • 16.7m² per 5 litres
  • 50mm wide line 334 metres long per 5 litres
  • 100mm wide line 167 metres long per 5 litres
Wet Film Thickness (WFT): 300 microns
Dry Film Thickness (DFT): 150 microns
Induction Time: -
Pot Life: -
Touch Dry: 15 minutes at 20°C
Rain Resistant: 40 minutes at 20°C
Traffic Ready: 2 hours at 20°C
Cleaner / Thinner: Clean all equipment immediately after use with clean water and detergent
Shelf Life: 12 months in original unopened containers.
Packaging: Available in 5 Litres

Related Products