Centrecoat Industrial Road Stencil, Electric Car Charging is an ideal reusable template for the identification of electric car charging points on roads or parking areas. Can be used via aerosol, spray or paint roller.
Please Note: The sizes listed in the Measurements dropdown are the size of the actual design.
Centrecoat Industrial Sign Stencil, Electric Car Charging is best used in residential areas and private areas where instructions have not been clearly stated or have faded over time. Use Centrecoat Industrial Sign Stencils to direct, warn, advise and instruct vehicle owners and pedestrians.
Centrecoat Industrial Sign Stencils are simple and easy to use and can be used with Centrecoat or FLAG Line Marking paints to achieve the best results. Centrecoat industrial Stencils range from small sized to large depending on the environment.
Surfaces and Environment
Centrecoat Industrial Sign Stencils can be used on a number of different surfaces in conjunction with the appropriate paint, including concrete, paving, stone, brickwork and in some cases, metal and wood, depending on the paint specifications.
- Promain Industrial Sign Stencils are made from semi-clear robust 350 Micron polyester material
- Ideal for industrial and commercial use in car parks, on roads etc.
- Easy to clean using warm water or white spirit.
- Other design styles and sizes by request
Height & Width of Stencil Surrounding Plastic
- A) Small 10" x 8" inch (255 x 203mm)
- B) Medium 15" x 12" inch (380 x 305mm)
- C) Large 24" x 17" inch (610 x 432mm)
- D) X Large 34" x 24" inch (863 x 610mm)
Maximum Height & Width of Stencil Cutout
|Electric Car Charging||110 x 102mm||200 x 186mm||320 x 297mm||475 x 441mm|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.