FLAG Thinners T10009 is best used with FLAG Chlorinated Rubber Line Paint and helps ensure the correct thickness is applied when mixed at the correct percentage of approximately 5-10%
FLAG Thinners T10009 can be used to clean utensils after use or mixed into the paint prior to use, with a stirring technique.
FLAG Thinners T10009 can be used to clean a variety of brushes or roller or to clean up spillages of paint. Please see FLAG chlorinated Rubber Line Paint for the specifics of where best to apply this product.
|Type:||Thinner for use with quick air-drying paint finishes|
|Area of Use:||Interior and exterior|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.