FLAG Thinner For Antifoulings and Primer

SKU
id3718
UN1263 (Class: 3, Pk Grp: III)
FLAG Thinners for use with Anti foulings and Primer.
Available in 1 Litre
£10.20 £8.50
In stock
Product Description

Flag Thinners are designed to be used with FLAG Anti Foulings and FLAG primers and can also be used to clean brushes and equipments.

Best Uses

Flag Thinners are best used with other FLAG products such as their anti-fouling and primers but as well as being used to thin FLAG paints they are also a really effective way of cleaning brushes and equipment as well.

Application

Handle thinners with care and make sure that you observe all safety labels. Simply add the required amount of thinner to your FLAG anti fouling paint or FLAG primers.

Surfaces and Environments

When applying anti fouling or primer that contains FLAG thinner make sure that the surface is stable, firm, dry and free of dust, sand, loose old paint, dirt, grease, oil and salt.

Technical Details

Technical Info

Components: Single Pack
Type: Thinner for all FLAG Antifoulings. Use for cleaning brushes and equipment
Area of Use: Interior and exterior
Stock Colours: Clear
Tintable: No
VOC Content: N/A
Volume Solids: N/A
Suitable Substrates: N/A
Flash Point: 42ºC
Specific Gravity:  0.87
Packaging: Available in 1 Litre

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use