Fosroc Galvafroid Thinner Cleaner

UN1268 (Class: 8, Pk Grp: III)
The suitable thinner and clean up agent for Fosroc Galvafroid cold galvanising paint.
Available in 500ml
£26.80 £22.33
In stock
Product Description

Fosroc Galvafroid Thinner Cleaner is the suitable thinner & clean up agent for FOSROC Galvafroid cold galvanising paint.

Best Uses

Fosroc Galvafroid paint is supplied at the correct consistency for direct application from the tin but, should it be found necessary to thin, only Fosroc Thinner/Cleaner should be added, at a rate not exceeding 1 litre of thinners to 8 litres of Galvafroid.

Fosroc Galvafroid paint can be removed from tools and equipment with Fosroc Thinner/Cleaner immediately after use. Dried material can only be removed mechanically.

Technical Details
  • Available in 500ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use