Fosroc Nitobond AR is a single component primer for the Fosroc Renderoc cementitious repair system. Also recommended as a curing membrane for Renderoc repairs or as an economical dust proofer for non-trafficked cementitious surfaces.
Fosroc Nitobond AR is formulated as the recommended primer for Fosroc's Renderoc cementitious repair systems. This single component, easy to use primer is also recommended as a curing membrane for Renderoc repairs or as an economical dust proofer for non-trafficked cementitious surfaces.
Fostoc Nitobond AR is easy to use, benefiting from high bond strength that is cost effective providing excellent bond strength between Fosroc Renderoc systems and concrete.
All surfaces should be clean and free from dust and contamination. Fosroc Nitobond AR is supplied ready for use when used as a bonding primer or curing membrane. When used as a surface sealer Nitobond AR should be diluted 1:1 with water for the first coat and as supplied for the second coat.
Application should be made via spray, brush or medium pile roller. Care should be taken to ensure complete and thorough wetting of the surface. Wash all equipment with clean water immediately after use.
|Suitable Substrates:||For use on non trafficked cementitious surfaces or under Fosroc Renderoc systems.|
|Application Method:||Spray, Brush or Medium Pile Roller|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Cleaner / Thinner:||Wash all equipment with clean water immediately after use.|
|Shelf Life:||Store in dry conditions at 5o-25oC. Shelf life is 12 months if stored in dry conditions. Protect from frost.|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.