Please note, this product has a 21 day lead time for delivery.
The Traditional Paint Company Interior Limewash is a high quality, interior Limewash for use on interior walls and ceilings.
Internal Limewash Paint has been specially developed for use on interior walls and ceilings. Available in a range of different colours, this Limewash paint is an increasingly popular product offering a finish similar to that of a washed out emulsion.
Ideal for many different surfaces
Internal Limewash can be applied to a number of internal surfaces including, Lime Render, Lime Plaster, Concrete, Lath and Plaster or Stoothing Walls and is commonly applied to walls and ceilings where a non-blistering finish is desired. However, Interior Limewash cannot be applied to surfaces that have already been coated with emulsion or gloss and these coatings should first be removed prior to application.
Authentic and decorative
Whilst Limewash offers a certain degree of flexibility, it is not elastomeric and consequently does not stretch with wall and ceiling movement, so small cracks can appear. This finish provides both an authentic period look and feel, which is ideal in many older buildings, whilst many people also consider this property to be highly decorative when used in the right environment.
Internal Limewash is also highly water permeable and breathable and because of this will not flake, peel or blister.
Plan your application in advance, NEVER coat in full sun as this will result in too fast a dry time and leads to a poor finish. Brushing is the recommended method of application, using a roller can result in too thick a coat being applied and this can also lead to a poor finish resulting in the limewash 'mud cracking'.
Remember it can take several days for the limewash to dry out, only then will the final colour be achieved as varying moisture levels and atmospheric conditions can give variations in the tone of the limewash.
|Stock Colours:||See colour Card|
|Tintable:||Yes, upon request. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For application to previously limed surfaces, bare plaster etc|
|Application Method:||Brush (2 knot brush or good masonry brush)|
|Theoretical Coverage:||9 m2 per litre per coat|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||4 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||ndefinite shelf life in unopened containers|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.