The Traditional Paint Company Traditional Barn Paint

SKU
id12216
UN1263 (Class: 3, Pk Grp: III)
A high performance product providing superior protection and decoration to a variety of external buildings.
Available in 2.5 Litres and 5 Litres
From £43.20 £36.00
In stock
Only %1 left
Product Description

Traditional Barn Paint is a water based high quality, dead matt paint. It is specifically suitable for the external coating of barns exposed to harsh conditions on a daily basis.

Best Uses

The final finish of Traditional Barn Paint is similar to that of a chalkboard with a matt finish suitable for application to a variety of external buildings, including stables, outbuildings, sheds, silos, windmills and barn conversions. This high quality product, can be applied to a range of different surfaces too, including cladding, weatherboard, feather edge board as well as steel and metallic substrates which should first be applied with a suitable oxide primer. When purchasing an external barn paint you need to be sure you are buying a product that will last a long time. By doing this you will save money and time in the long run by extending the life and reducing the costs of maintenance. External paints suffer constant exposure to weathering and outdoor conditions. Henceforth, barns require highly protective coatings.

Traditional Barn Paint's formulation includes natural zinc oxide. This offers long term protection against fungal and insect attack. These kind of attacks can cause damage to the substrate and result in external contamination entering a building. Zinc Oxide is one of the best natural pesticides available.

Unlike other conventional Barn Paints, Traditional Barn Paint will not crack, flake or peel over time. This usually happens after exposure to natural atmospheric conditions, such as moisture or humidity. This barn paint will remain strong over time and bonds especially well to cladding surfaces. Furthermore, it protects with a degree of flexibility that moves with the surface.

Application

The recommended application for Traditional Barn Paint is either brush or medium pile roller. It is recommended that you use a three coat system, consisting of 1 x priming coat, followed by 2 x full coats.

Technical Details
Components: Single Pack
Type: Emulsified linseed oil
Finish: Matt
Stock Colours: Available in a large range of stock colours. See Web Site for details
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
Suitable Substrates: All woodwork (plinths, Barns, Fences, Sheds etc.)
Application Method: Brush (recommended) or medium pile roller
Theoretical Coverage: 8m² per litre per coat
Water Resistant: 1 hour at 20ºC
Fully Dry: 3 - 7 days at 20ºC depending on weather
Overcoatable: After 24 hours at 20°C
Cleaner / Thinner: Water
Shelf Life: 12 months if stored in original unopened container at temperatures between 5 and 25°C
Packaging: Available in 2.5 Litres and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use