£9.95 delivery on orders excluding certain products & postcodes *
International Enviroline 376F-60
SKU
ID23929
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: II)
Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.
Available in 18 Litres
From
£800.40
£667.00
In stock
Only %1 left
Product Description
International Enviroline 376F-60 is a solvent free, two component polycyclamine cured lining system with flake and fibre reinforcement.
Best Uses
Enviroline 376F-60 is best used to provide corrosion protection for the internals of steel storage tanks, vessels, spools and pipes. It is suitable for use with a range of products, including crude oil up to 93ºC (200ºF), refined oil products and biofuels.
In addition, Enviroline 376F-60 is also suitable as an external coating for buried pipes.
Application
The recommended application method is Plural Component Airless Spray, however Airless Spray and Brush are also suitable. Please note that Air Spray (pressure pot) is not suitable for this product.
Ensure all surfaces are clean, dry and free from contamination. Prior to application, all surfaces should be assessed and treated in accordance with ISO 8504:2000. Where necessary, remove weld spatter and where required, smooth weld seams and sharp edges.
Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.
Steel Substrates
Best performance will always be achieved when Enviroline 376F-60 is applied to surfaces prepared by abrasive blast cleaning to Sa3 (ISO 8501-1:2007) or SSPC-SP5. Where Enviroline 376F-60 is not to be used in high heat and/or aggressive service, preparation to Sa2½ (ISO 8501-1:2007) or SSPC-SP10 may be acceptable. A sharp, angular surface profile of 75-125 microns (3-5 mils) is
recommended. Contact our Technical Team for further information.
Enviroline 376F-60 must be applied before oxidation of the steel occurs. If oxidation does occur, the entire oxidised area should be re-blasted to the standard specified above. Any surface defects that are revealed by the blast cleaning process should be ground, filled or treated in the appropriate manner.
The preferred method of holding the blast standard is by dehumidification. Alternatively, an approved holding primer may be used.
Concrete Substrates
Concrete should be well cured prior to application of the flooring, lining or coating system. Refer to the Concrete Surface Preparation Guidelines for more information.
Technical Details
Features and Benefits
- Complies with the API652 definition of a thick-film reinforced lining and offers
proven hole-bridging capabilities in a single coat over new or pitted steel - Resists continuous immersion in a wide range of chemicals, including crude oil and hydrocarbon water mixtures up to 90°C
- High chemical resistance makes it suitable for storing bio-fuel and bio-ethanol
- Flake reinforced system is spray applied in a single coat, significantly increasing application rates and reducing labour costs
- Rapid cure time minimizes process disruption, allowing return to service within 14 hours
- Excellent impact and abrasion resistance minimizes turnaround times and clean-outs
- Low temperature cure version available, curing at temperatures down to -7°C
- Enviroline 376F-60 reinforced lining system offers tank internal inspection intervals of potentially 20 years
Technical Info
| Components: | Two Components |
| Type: | Solvent Free |
| Finish: | n/a |
| Stock Colours: | Green |
| Tintable: | Limited colour range available. Contact us for more information. |
| VOC Content: | 13 g/lt |
| Volume Solids: | 100% |
| Suitable Substrates: | Steel, Concrete |
| Application Method: | Plural Component Airless Spray, Airless Spray, Brush |
| Theoretical Coverage: | 0.61 m²/litre at 1650µm d.f.t |
| Wet Film Thickness (WFT): | 500-2000µm |
| Dry Film Thickness (DFT): | 500-2000µm |
| Induction Time: | - |
| Pot Life: | 10 minutes at 40°C |
| Touch Dry: | 2 hours at 25°C |
| Overcoatable: | Min 2.5 hours to max 28 days at 25°C |
| Hard Dry: | 4 hours at 25°C |
| Cleaner / Thinner: | Thinning not usually required. Clean equipment with Enviroline 71C or International GTA203 |
| Shelf Life: | 12 months from date of production unopened |
| Packaging: | Available in 18 Litres |
Related Products
International Interline 955
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
From
£900.67
£750.56
International Thinner GTA203
A thinner and equipment cleaner for use with International products.
From
£69.24
£57.70
RODO ProDec Wire Brush - PSAT001
Designed to remove rust and scale from rough surfaces, prior to painting.
From
£6.38
£5.32
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
From
£2.34
£1.95
RODO Blackrock Lightweight PU Gripper Gloves
Extremely lightweight gloves with PU coated palms and fingers for exceptional dexterity and grip in wet and dry conditions.
From
£0.77
£0.64
International Enviroline 2405
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
From
£642.84
£535.70
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
RODO All Purpose Paint and Varnish Paint Brush
A general contractor all purpose paint brush in various sizes.
From
£2.69
£2.24