International Intercryl 525

SKU
id23933
Non Hazardous
A VOC compliant, single component, water based anti-corrosive primer/finish.
Available in 20 Litres. Tintable to thousands of colours.
From £464.04 £386.70
In stock
Only %1 left
Product Description

International Intercryl 525 is a VOC compliant, single component, water based anti-corrosive primer/finish based on weather resistant acrylic copolymer technology. It exhibits excellent colour and gloss retention.

Best Uses

Intercryl 525 is intended for use as a primer/finish for structural steel. It is suitable for use in a wide variety of industrial environments, including:

  • Bridges
  • Commercial Buildings
  • Infrastructure
  • Manufacturing Plants

Application

The recommended method of application is Airless Spray, although Air Spray (pressure pot) is also suitable. Application by brush or roller may require more than one coat and should only be used for small areas or touch-up work.

Ensure all surfaces are clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning. Strict adherence to all cleanliness standards is essential for application of water based coatings.

Abrasive Blast Cleaning
Abrasive blast clean to Sa2½ (ISO 8501-1:2007) or SSPC-SP6. If oxidation has occurred between blasting and application of Intercryl 525, the surface should be re-blasted to the specified visual standard.
Any surface defects that are revealed by the blast cleaning process should be ground, filled, or treated in the appropriate manner.

Primed Surfaces
Intercryl 525 can be applied over approved anti-corrosive primers. The primer surface should be dry and free from all contamination, and Intercryl 525 must be applied within the overcoating intervals specified (consult the relevant product data sheet).

Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO8501-1:2007) or SSPC-SP6 Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch primed prior to the application of Intercryl 525.

System Compatibility

Although this product is primarily designed as a primer/finish for a water-based acrylic paint system, it can also be used for application as a semi gloss finish on a wide variety of water based and solvent based primers, such as Intergard 251.

Technical Details

System Compatibility

Typical water based primers:

  • InterH2O 280
  • InterH2O 499
  • InterH2O 401

Typical solvent based primers:

Typical water based topcoats:

  • Intercryl 530
  • Intercryl 700

Technical Info

Components: Single Pack
Type: Water Based Acrylic
Finish: Eggshell
Stock Colours: White
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 14 g/kg
Volume Solids: 47% ± 2%
Suitable Substrates: Structural Steel
Application Method: Airless Spray, Air Spray, Brush, Roller
Theoretical Coverage: 6.30 m²/litre at 75µm d.f.t
Wet Film Thickness (WFT): 106-213µm
Dry Film Thickness (DFT): 50-100µm
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 25°C
Overcoatable: Min 8 hours at 25°C
Hard Dry: 2 hours at 25°C
Cleaner / Thinner: Clean Water or International GTA991
Shelf Life: 12 months from date of production unopened
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products