Johnstones Trade Quick Dry Zinc Phosphate Primer is suitable as an anti-corrosive primer for ferrous metals and all suitably prepared non-ferrous substrates. This product is an ideal primer for overcoating with Johnstone’s Semi-Gloss Steel & Cladding Topcoat.
To prepare Steel, blast clean to SIS-Sa 21/2 minimum or mechanically prepared to SIS-St 3 minimum. Previous suitable coats should be clean, dry and abraded if necessary. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
Stir thoroughly before use. Easy to apply by brush.
|Stock Colours:||Red Oxide, Grey and White|
|VOC Content:||450.0g per Litre|
|Suitable Substrates:||An anti-corrosive primer for ferrous metals and all suitably prepared non-ferrous substrates|
|Theoretical Coverage:||11 m2 per litre|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||35 microns|
|Overcoatable:||After 16 - 24 hours at 20°C|
|Cleaner / Thinner:||Johnstones TC2 Thinner and Cleaner|
|Shelf Life:||5 years unopened|
|Packaging:||Available in 2.5 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.