Sherwin Williams M600 - Formerly Leighs is a quick drying single pack alkyd anti corrosive primer pigmented with zinc phosphate for the protection of steel.
Sherwin Williams M600 is best suited as a protective finish for steel in circumstances where a quick drying coating is important.
M600 can be applied via airless spray, conventional spray or brush for small areas and touch up only. Recommended cleanser / thinner no2. Blast clean to Sa2½ BS EN ISO 8501-1:2007. Average surface profile in the range 50-75 microns. Manually prepared surfaces should be prepared to a minimum standard of ST3 BS EN ISO 8501-1:2007 at the time of coating. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Indefinitely overcoatable with a wide range of materials, including alkyd, chlorinated rubber and vinyl systems.
- Drying Time: 30 minutes at 15°C to touch, 1 hour at 15°C to recoat
- Dry Film Thickness: 75 microns
- Theoretical Coverage: 5.8m2 per litre
- Available in a limited range of colours
- Available in 5 and 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.