Bedec Multi Surface Paint MSP

SKU
id3193
Non Hazardous
A quick drying and versatile, non-yellowing water based paint, available in a wide range of colours and a choice of finishes.
Available in 2.5, 5 and 20 Litres. Tintable to over 35,000 colours
From £19.20 £16.00
In stock
Product Description

Bedec Multi Surface Paint (MSP) is a quick drying, water based, non yellowing paint for wood, plaster, MDF, masonry, Melamine, Ceramic Tiles, Plastics, uPVC, etc.

Bedec Multi Surface Paint (MSP) is a quick drying, new generation, water based, non-yellowing paint, which is designed for use on a wide range of surfaces. There is no need for a primer when MSP is used as a wood/timber coating. Bedec Multi Surface Paint is ideal for use in the home or garden and can be used on a variety of substrates and furniture.

Water based gloss paints do not offer the same high sheen level as oil based paints, so if you require a sheen finish, then we would suggest the Bedec Multi-Surface-Paint in satin alternatively MSP in available in matt or gloss finish.

Best Uses

Bedec Multi Surface Paint is best used for the decoration and redecoration of old and new surfaces and is available in a choice of many colours. Bedec Multi Surface Paint is ideal for providing a surface with a choice of a Matt, Soft Gloss or Satin finish. Bedec Multi Surface Paint can be applied directly to Radiators, Wood, Plaster, MDF, Masonry, Melamine, Ceramic Tiles and Plastics.

Please see our demonstrative video for more information on the best uses for Bedec MSP.

Application

Bedec Multi Surface Paint can be applied using a brush, roller or spray and was voted the Professional Builder's Product of the year in 2003. The application method can vary depending, on the surface you are applying it to. Bedec Multi Surface Paint has good drying time and can be recoated after just 4 hours.

Surface and Environment

Bedec Multi Surface Paint is perfect for use on wood and timber and suitable for painting almost any surface in the home, garden or commercial environments. MSP is ideal for use on concrete, brick, rendering, asbestos, metal cladding, iron, steel, including galvanised, aluminium, lead, zinc, copper, timber, asphalt, bitumen, ceramic tiles and most plastics, uPVC windows and drainpipes.

Technical Details

Notes

  • No primer (except on ferrous metal) or undercoat (except where staining may show)
  • Quick drying, micro-porous, low odour and non-yellowing
  • Has lower VOC than most other paints
  • No primer or undercoat is necessary unless used on ferrous metal
  • For porous substrates thin the first coat with 30% water
  • Water based gloss paints do not offer the same high sheen level as oil based paints
  • Can be tinted to any colour, including most Dulux colours, RAL and British Standard
  • Please call for further details - custom tinting cannot be ordered online.

Technical Info

Components: One Part
Type: Water Based Acrylic
Finish: Soft Gloss, Satin, Metallics and Matt
Stock Colours: Various Stock Colours
Tintable: Upon Special Request, Depending on Quantity. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 140.0g per Litre
Volume Solids: 52%
Suitable Substrates: Most building surfaces such as concrete, brickwork, rendering, asbestos, bitumen, iron, aluminium, lead, zinc, copper, timber, slate, most plastics, fiberglass, and cement fibre board.
Application Method: Brush, Roller, Conventional H.V.L.P or Airless Spray
Theoretical Coverage: 12 -14 m2 per litre per coat
Wet Film Thickness (WFT): 77 microns
Dry Film Thickness (DFT): 31 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 - 4 hours at 18°C
Overcoatable: 4 hours at 18°C
Fully Cured: 1 month at 18°C
Cleaner / Thinner: Clean up with warm soapy water
Shelf Life: 24 months
Packaging: Available in 750ml, 2.5, 5 and 20 Litres
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use