Nullifire PM019 Primer For Blasted Steel Substrates

SKU
id17655
Part A and Part B: UN1263 (Class: 3, Pk Grp: II)
A two component, anti corrosive transport primer for temporary protection of blasted steel substrates, which will be finished in a compatible basecoat.
Available in 20 Litres in Grey
£374.08 £311.73
In stock
Product Description

Nullifire PM019 Primer is a two component, anti corrosive transport primer for temporary protection of blasted steel substrates, which will be finished in a compatible basecoat.

Best Uses

Nullifire PM019 Primer is a two component, anti corrosive transport primer for temporary protection of blasted steel substrates. Applied at standard film thickness, Nullifire PM019 Primers protection in outdoor conditions is limited to approximately 3 months. Within this period of time the finishing coating system needs to be applied.

Suitable for C1, C2 and C3 areas.

Application

Apply via airless or airmix spray equipment ideally.  Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the data sheets found on the technical tab.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details
Components: Two Part
Type: Solvent Based Primer
Finish: Matt
Stock Colours: Grey
Tintable: No
VOC Content: 625.0g per Litre
Volume Solids: 28%
Suitable Substrates: For steel
Application Method: Airmix Spray or Airless Spray, Brush, Roller
Theoretical Coverage: 9.3 m2 per litre at 30 microns
Wet Film Thickness (WFT): 107 microns
Dry Film Thickness (DFT): 30 microns
Induction Time: -
Pot Life: 8 hours at 20°C
Touch Dry: 16 hours at 20°C
Overcoatable: After 8 hours at 20°C
Fully Cured:
Cleaner / Thinner: Nullifire FC002 Thinner
Shelf Life: 12 months when stored as recommended in original unopened container
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use