Protecta-Kote UVR Accelerator

SKU
id17529
UN1760 (Class: 8, Pk Grp: III)
A pure, solvent free catalyst used to speed up the drying time of Protecta-Kote UVR non-slip and smooth coatings.
Available in 20ml for 1 Litre Protecta-Kote UVR and 80ml for 4 Litres Protecta-Kote UVR
From £5.75 £4.79
In stock
Only %1 left
Product Description

Protecta-kote UVR Accelerator is a liquid second component which may be added to ProtectaKote UVR if desired to increase the rate at which the product cures at low temperatures or humidity. Not suitable for Protecta-Kote non UVR.

Best Uses

Protectakote UVR Accelerator is a second component that can be added to Protecta-Kote UVR paint  to speed up the drying time. This is ideal when applying Protecta-Kote in Winter. Protectakote UVR Accelerator should only be added where time constraints exist and temperatures are lower than 15°C.

Protectakote UVR Accelerator may reduce the glossiness of the application especially when the humidity is high.

  • Pre-weighed – just add and stir in
  • Fast drying - Drying times can be reduced to as little as one hour
  • Low humidity and low temperature effects which extend drying times can be reduced
  • Lead & heavy metal free.

Application

Protectakote UVR Accelerator is supplied in preweighed doses suitable for either 1 litre packs or for 4 litre packs. The product is supplied in a 20ml dose for addition to a litre, or an 80ml dose for addition to a 4 litre pack. In rare cases two doses may be added - when humidity and/or temperature is very low. The active catalyst in a 20ml dose is 3g of an amine, while an 80ml dose contains 12g of amine. A 20ml (or 80ml) dose is a 2% addition by volume. The percentage addition of active accelerator is 100% by mass per dose.

Stir product well before addition. Add the accelerator with stirring. Ensure that the accelerator is well mixed in. Put the lid back on until you are ready to apply the coating.

If used at room temperature to speed up the drying time, apply thinner coats than usual. Protectakote UVR Accelerator may reduce the glossiness of the application especially when the humidity is high.

Do not confuse with Protecta-Kote Accelerator which is also in 20ml and 80ml doses. Addition of Protectakote UVR Accelerator to regular Protectakote will cause lumps to form immediately and render the product useless.

Technical Details
Components: One Part
Type: Additive
Finish: -
Stock Colours:  
Tintable:  
VOC Content: -
Volume Solids: -
Suitable Substrates: -
Application Method: Use with Protecta-Kote UVR Rubber Anti-Slip Paint only
Theoretical Coverage: -
Wet Film Thickness (WFT): 330 microns
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured:

With One Dose: 2 hours 15 mins at 10°C

With Two Doses: 1 hour 45 mins at 10°C

Cleaner / Thinner: -
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 20ml and 80ml

Related Products