Protecta-Kote Rubber Anti-Slip Rubber Paint UVR

Protecta-Kote Rubber Anti-Slip Rubber Paint UVR is a tough anti-slip aliphatic polyurethane coating, which forms a colour-fast, abrasion and weather resistant film.

If you require a clear anti slip finish, see Protecta-Kote Safekote as a potential alternative.

Protectakote UVR is single component, ready to use and easy to apply. Protectakote UVR is easy to apply and ideal to create anti-slip areas on exterior and interior surfaces.

Best Uses

Protecta-Kote Rubber Anti-Slip Rubber Paint UVR provides a excellent weatherproof protective finish that resists rust, petrol spillages, most chemicals and acids, stone damage and is ideal for use on most vehicles. As well as these properties, Protecta-Kote Rubber Anti-Slip Rubber Paint UVR also provides protection against heat and salt water, making it ideal for boats and exterior use. Protectakote UVR can be applied to: metal, concrete, wood, fibreglass, PVC, rubber and glazed tiles. PLEASE NOTE: Clear Smooth & White Smooth are NOT Anti Slip.

Protectakote UVR can be used for:

• Protective linings for pick-up trucks and other commercial and military vehicles
• Anti-slip floors, walkways and stairs
• Floors and steps of transporters and buses
• Exterior ramps for wheelchair access
• Exterior non-slip areas for playgrounds and schools
• Stairs, emergency exits and fire escapes
• Helicopter pads
• Non-slip areas around machinery
• Outdoor flooring applications
• Any other area where an anti-slip coating is required

Not suitable for application to polypropylene. Call our technical team to check if your substrate is suitable for this product.

Application

Always stir throughly before use. Ensure all substrates are thoroughly dry, clean, sound and free from any contaminants such as dirt, rust, salt, algae and grease. Protectakote UVR exhibits good adhesion to most primers. All non-porous substrates, with the exception of painted surfaces require a primer.

For Steel: Abrade surface lightly and remove any surface rust or mill scale by sanding, wire brushing, with a chipping hammer or sandblasting. Prime with Protectakote 2K Metal Primer or Protectakote Universal Epoxy Primer, as per instructions, within 30 minutes

For Galvanized Iron: Clean away grease and dirt with a suitable galvanized iron cleaner until a water break-free surface is attained. Rinse well with water and allow to dry. Prime with Protectakote Universal Epoxy Primer the same day as the surface was prepared to avoid re-contamination and flash rust.

For Aluminium: Abrade to fresh metal, clean well using detergent. Prime with Protectakote 2K Metal Primer as per instructions within 30 minutes.

For Concrete: Allow new concrete at least 28 days to cure. Non-porous cement must be acid-etched, rinsed well and dried. Prime with Duram Duraprime epoxy primer as per instructions if weak, damp or oil contaminated.

Surface and Environment

Protecta-Kote Rubber Anti-Slip Rubber Paint UVR is suitable for industrial flooring, ramps, walkways, wheelchair ramps, floors, fire escapes, playground equipment as well as vehicles, pickup trucks, boats, canal boats, decks, on the farm or stables or any other application where a tough, non-slip, easy to clean finish is required. Use Protecta-Kote Rubber Anti-Slip Rubber Paint UVR on metal, concrete, wood, fibreglass, some plastics and rubber. This coating offers an extremely tough, chemical bond that protects against UV light and weathering, and will flex with the surface material to ensure it does not crack or peel.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu