£7.50 delivery on orders excluding certain products & postcodes *
Protecta-kote Clear Primer is a single pack adhesion primer suitable for smooth in-organic surfaces such as marble, glazed tiles, shower trays and prepared aluminium, prior to the application of Protecta-kote Anti Slip paint.
Protecta-kote Clear Primer has been developed to ensure excellent surface adhesion for surfaces that are smooth and have low adhesion properties. Protecta-kote Clear Primer should be used on in-organic surfaces, before the application of Protectakote anti-slip paint. It doesn't change the substrate's appearance but enables the application of clear protective or anti-slip coatings, such as Safekote, to surfaces such as ceramic tiles, marble and other smooth shiny surfaces.
Contaminants, such as dust, dirt and oils should be removed and the Protecta-kote Clear Primer be applied by paintbrush, roller or spray. Please read the technical data sheets for full preparation and application methods.
Protecta-kote Clear Primer is ideal to be used for the preparation of inorganic surfaces such as marble, glazed tiles and aluminium prior to the application of a polyurethane coating.
Components: | One Part |
Type: | Primer |
Finish: | |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | 400.0g per Litre |
Volume Solids: | 0% |
Suitable Substrates: | For |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | Minimum 10 m2 per litre |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | < 20 minutes (at 25ºC and 50% relative humidity) |
Overcoatable: | 30 minutes (at 25ºC and 50% relative humidity) |
Fully Cured: | |
Cleaner / Thinner: | Not required |
Shelf Life: | 18 months |
Packaging: | Available in 1 and 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.