£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat Eco Acid Etch 100% Biodegradable is a natural organic salt based product, designed as an environmentally friendly replacement to the strong acids traditionally used to clean walls, floors and other surfaces.
Centrecoat Eco Acid Etch 100% Biodegradable provides a safe alternative to acid etch used on power floated floors, ideal for removing efflorescence and mortar stains without the need to neutralise the substance after, due to it's anti-corrosive nature.
Centrecoat Eco Acid Etch 100% Biodegradable can be applied using a high quality brush with a back and forth scrubbing motion to remove difficult stains and efflorescence. Available in 5 litres, Centrecoat Eco Acid Etch 100% Biodegradable has a theoretical coverage rate of 4-8m2 per litre.
Centrecoat Eco Acid Etch 100% Biodegradable is safe to use on a wide variety of surfaces, including glass, rubber, plastic, concrete and brickwork and is highly suited for the removal of mortar, cement, scale, rust staining, atmospheric contamination and efflorescence. Safe to use internally and externally.
Components: | One Part |
Type: | Etching Solution |
Finish: | - |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | 0.0g per litre |
Volume Solids: | - |
Suitable Substrates: | For concrete, brick, statues and monuments |
Application Method: | Low pressure spray |
Theoretical Coverage: | 4 - 6 m2 per litre |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | - |
Overcoatable: | - |
Fully Cured: | - |
Cleaner / Thinner: | - |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.