EpoxyShield 2 Pack Water Based Epoxy Garage Floor Paint offering outstanding resistance to the wear and tear of car tyres.
Rustoleum EpoxyShield MAXX 5300 is a user friendly and easy to apply, water based 2 component epoxy garage floor paint that offers outstanding durability and high quality adhesion. Rustoleum EpoxyShield MAXX 5300 is the best on the market for offering outstanding resistance to the wear and tear of car tyres.
Rustoleum EpoxyShield MAXX 5300 is designed specifically for use on garage, workshop, floors or on porous surfaces sealed with 5220 sealer. Rustoleum EpoxyShield MAXX 5300 can be used with medium to heavy traffic although this is unlikely to be achieved in a garage.
Rustoleum EpoxyShield MAXX 5300 can be applied using brush, roller or spray and has a theoretical coverage rate of 7m2 per litre in one coat. Rustoleum EpoxyShield MAXX 5300 is available in a range of colours for the protection and decoration of garage floors.
If you require decorative flakes: While the paint is still wet, scatter the flakes as required. Once the paint is dried, likely sand to denib the flakes. We recommend a clear overcoat to seal the flakes such as Rustoleum 4900 Polycoat 2K.
Surface and Environment
Rustoleum EpoxyShield MAXX 5300 offers a long lasting gloss finish that works excellently at resisting chemical spills, oils and petrol. Rustoleum EpoxyShield MAXX 5300 should be applied to concrete floors that are completely clean and dry and can be combined with anti slip additives to prevent the possibility of accidents occurring.
- For porous surfaces seal with Rustoleum 5220 Sealer
- EpoxyShield 5300 MAXX. is for medium to heavy traffic
- Easy to apply, no primer required
- EpoxyShield 5300 MAXX. is a long-lasting gloss finish
- Best possible car tyre resistance
- Highly resistant against solvents and chemicals
- Non-skid or decorative finish optional
|Stock Colours:||RAL 1015, RAL 7035, RAL 7001|
|VOC Content:||53.0g per Litre|
|Suitable Substrates:||For concrete floors, which are completely clean and dry|
|Theoretical Coverage:||7 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Induction Time:||15 minutes at 20°C|
|Pot Life:||1.5 hours at 21°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35° C|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.