£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

Rustoleum ND14 Cleaner and Degreaser

SKU
id2570
UN1824 (Class: 8, Pk Grp: II)
Removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressure steam clean.
Available in 5 Litres
£70.80 £59.00
In stock
main product photo
Product Description

Rust-Oleum ND14 Cleaner and Degreaser removes grease, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration, can also be used as part of a high pressure steam clean.

Rust-Oleum ND14 Cleaner/Degreaser is an excellent, virtually odour free, alkaline and non-flammable, concentrated cleaner/degreaser for surfaces including metal. ND14 Cleaner/Degreaser should be used to remove grease, oil, proteins, dirt and many other surface contaminants. prior to painting.

Best Uses

Rust-Oleum ND14 Cleaner and Degreaser is best used for the removal of grease, oil, proteins, dirt and other contaminants from coated, mineral and steel substrates, prior to decoration. Rust-Oleum ND14 Cleaner and Degreaser can also be used as an additive when high pressure (steam) cleaning.

Application

After scraping and sweeping away as much debris and raised dirt as possible, Rust-Oleum ND14 can be applied to the substrate with an artificial sponge, cloth or stiff nylon brush or broom. Dilute the product with water, as advised, before commencing the cleaning process. After cleaning, remove any remaining water and allow the surface to dry. If moisture is left on the surface it can cause any future coating system to fail.

Surface and Environment

Rust-Oleum ND14 Cleaner and Degreaser has been designed for the removal of grease, oil, proteins, dirt and other contaminants, from coated, mineral and steel substrates, prior to decoration.

Technical Details

Notes

  • A 2 - 5% concentration with water is recommended
  • Can be used as an additive for high pressure (steam) cleaning
  • Removes grease, oil, proteins dirt and many other surface contaminants
  • Non-flammable

Technical Info

Components: One Part
Type: Alkaline Cleaning Solution
Finish: -
Stock Colours: Clear
Tintable: No
VOC Content: 92.0g per Litre
Volume Solids: -
Suitable Substrates: Should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates.
Application Method: Artificial Sponge, Cloth or Stiff Nylon Brush or Broom.
Theoretical Coverage: The content of the concentrated 5 litre packaging will allow you to treat a surface of up to 500m2, based on a dilution of 1:20
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: -
Shelf Life: 2 years unopened
Packaging: Available in 5 Litres
Product Data Sheet (1.59 MB)
Safety Data Sheet (251.39 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use