Centrecoat Mobile Home and Caravan Paint

SKU
id3638
Non Hazardous
An easy to apply paint for park homes, mobile homes, static homes and caravans. It offers a semi-gloss finish.
Available in 10 Litres. Tintable to approx 30,000 colours
From £136.68 £113.90
In stock
Only %1 left
Product Description

Centrecoat Mobile Home and Caravan Paint is a easy to apply water based paint for use on mobile homes, park homes and caravans. It offers a decorative semi-gloss finish that can be used on metal cladding also.

Available in a range of colours, Centrecoat Mobile Home and Caravan Paint is ideally used as an overcoat with Mobile Home and Caravan Primer from Centrecoat.

Best Uses

Centrecoat Mobile Home and Caravan Paint is best used for decorating and protecting the exterior surfaces of mobiles homes, park homes and caravans. Centrecoat Mobile Home and Caravan Paint works to protect the outer skin from UV light and weathering. Centrecoat Mobile Home and Caravan Paint offers excellent corrosion resistance with quality hiding power.

Application

Centrecoat Mobile Home and Caravan Paint can be easily applied using brush, roller or airless spray and has a theoretical coverage rate of 9m2 per litre. After just 40 minutes, Centrecoat Mobile Home and Caravan Paint will be dry to touch and ready for an overcoat in just 4 hours.

Surface and Environment

Centrecoat Mobile Home and Caravan Paint can be used on all metal substrates that have first been primed with Rust-Oleum Noxyde or Rust-Oleum Peganox. Centrecoat Mobile Home and Caravan Paint is designed for outdoor use, and therefore offers customers extreme resistance to all aspects of the outdoor world.

Technical Details

Features

Technical Info

Components: One Part
Type: Water Based
Finish: Satin
Stock Colours: Tintable to most BS, RAL or NCS colours
Tintable: Yes. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 128.0g per Litre
Volume Solids: 33%
Suitable Substrates: For metal cladding or any metal surface primed with Centrecoat Mobile Home Primer. Also directly onto aged Plastisol in good condition
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 8 m2 per litre
Wet Film Thickness (WFT): 130 microns
Dry Film Thickness (DFT): 45 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 8 hours at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between
5° and 35°C
Packaging: Available in 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use