Rustoleum EpoxyShield 2901 Cleaner Degreaser

SKU
ID3355
Non Hazardous
EpoxyShield Cleaner Degreaser for removing grease and other surface contaminants.
Available in 5 Litres
£51.55 £42.96
In stock
Product Description

Rust-Oleum Epoxyshield Degreaser 2901 is a cleaning solution used for the removal of grease, oil proteins and many other different contaminants from floors walls, galvanised steel, zinc, aluminium or anodized aluminium.

Rust-Oleum Epoxyshield Degreaser 2901 is a cleaning solution designed for use on floors, and power floated surfaces as well as some roofing surfaces galvanised steel, zinc, aluminium or anodized aluminium and walls. Rust-Oleum Epoxyshield Degreaser 2901 can be used for the removal of grease, oil proteins and many other different contaminants, available in 5 litre plastic containers.

Best Uses

Rust-Oleum Epoxyshield Degreaser 2901 is best used for the removal of different types of contaminants on coated, mineral and steel substrates as well as floors. Rust-Oleum Epoxyshield Degreaser 2901 is virtually odour free and environmentally friendly, with no harmful toxins, making it ideal for use indoors and outdoors.

Suitable for use within Rust-Oleum flooring systems.

Application

To ensure homogeneity shake well before use. Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. Rust-Oleum 2901 Epoxyshield Cleaner/Degreaser for floors can be applied with a sponge, cloth, brush, and broom or cleaning machine. When used in combination with a cleaning machine dilute with 50% cold water. After use rinse with plenty of fresh water. After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system. Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Always rinse the surface after cleaning.

Surface and Environment

Rust-Oleum Epoxyshield Degreaser 2901 is designed for use on coated, mineral and steel substrates for the removal of grease, oil proteins and a variety of other different contaminants. Rust-Oleum Epoxyshield Degreaser 2901 can be used internally or externally and ideally should be used in dry conditions to ensure optimum cleaning results.

Technical Details
Components: One Part
Type: Concentrated Alkaline
Finish: -
Stock Colours: Clear
Tintable: No
VOC Content: 9.0g per Litre
Volume Solids: -
Suitable Substrates: For coated, mineral and steel substrates
Application Method: Sponge, Cloth, Brush, Broom or Cleaning machine
Theoretical Coverage: 6 - 8 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: -
Shelf Life: 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 5 Litres