Rustoleum High Performance Industrial floor paints are a range of specially formulated paints for use in warehouses, garages or workshops, products such as EpoxyShield Maxx or the single pack version EpoxyShield Ultra, or the extremely popular Pegakote, a water based 2 pack epoxy floor paint. Paints such as the 9100 again another 2 pack floor paint are all available from Promain the UK’s largest distributor of Rustoleum Mathys paints. If you require assistance in choosing the correct floor paint for your application or just require some reassurance on you selection please call our experienced manufactured trained Technical Department for free advice.
Items 1-28 of 34
A hard wearing two-component water based epoxy floor paint and wall paint for interior use.
A solvent based industrial quality floor coating paint designed for interior and exterior use.
2-Pack Water Based Epoxy Floor Paint excellent wear, tyre, impact and abrasion resistance.
EpoxyShield water based epoxy floor paint for garage floors factories, warehouses or workshops.
A tough, flexible paint for tarmac, asphalt or concrete to colour and protect drives, paths, balconies, car parks, playgrounds, tennis courts.
A rapid curing polyaspartic coating for application between 10°C and 25°C.
A single pack elastomeric floor paint for factories, workshops and garages.
Non-skid additive, can be added directly to the liquid coating or broadcast over the final wet finish.
A two component, rapid curing, water-based, epoxy coating designed for industrial and warehouse concrete floors.
Low Solvent 2 Pack Epoxy Industrial Paint, highly resistant to strong chemicals and water submersion, used on floors, concrete and metal.
A quality transparent multi-purpose water based scratch-resistant topcoat suitable for interior and exterior use.
A solvent based industrial floor paint designed for interior and exterior use.
Helps to provide good adhesion properties to smooth, dense power floated floors as well as galvanised steel and aluminium.
A high performance epoxy system for application at temperatures down to 0°C.
A low temperature rapid curing polyaspartic floor paint.
A 2 pack aliphatic polyurethane, a high gloss solvent based polyurethane, very durable and colour fast, for floors and walls, metal or concrete.
A 2 component self levelling mortar and coating all in one and has been designed to provide a decorative and protective coating to industrial floors. ...
This product is now discontinued.
A single pack adhesion primer for freshly laid new smooth floors in garages, workshops warehouses etc.
A rapid curing 2 part solvent free epoxy primer designed to improve the adhesion of coatings.
A low cost way of adding decoration to garage or workshop floors.
Specifically designed for repairing Asphalt, Concrete and Tarmac surfaces along with the application of repairing systems.
Can be added to other EpoxyShield floor coating systems to create a non slip surface suitable for use in garages, and light industrial exposures.
EpoxyShield Clear Sealer Primer and floor sealer 5220, a water based clear and non yellowing coating.
Kit consists of a two part epoxy coating, a cleaning solution, decoration chips, paint paddle and an instruction DVD.
A durable bitumen-based pothole patch repair for roads and paths.
An easy to use water-based, durable floor paint for interior use.
Self levelling epoxy system for horizontal concrete floors or asphalt-concrete floors.
Items 1-28 of 34
Rustoleum have developed a wide range of floor paints including Anti-Slip floor paints to suit all requirements and budgets. From the Rustoleum 7100NS a single pack alkyd coating to 2 pack epoxies such as the 9200 where an anti slip aggregate can be added to create a slip resistant finish. Rust-Oleum ColdMax Rapid 9700 a two component polyaspartic fast curing floor paint designed for internal and external use that can be applied and cures in temperatures as low as minus 10 degrees celsius. Polyurethane floor coatings that offer a highly durable finish even when applied by paint brush or a 15 inch floor roller.
Recently Rustoleum have launched a range of new floor paints and primers such as the Rustoleum 3366, a faster drying primer than the 3333, both are epoxy adhesion primer for smooth surfaces such as power floated floors. Another new coating developed for floors is the Rustoleum 7201 Primer which has been developed as an adhesion primer for newly laid floors allowing them to be painted shortly after laying. This product is especially suitable for application with Rustoleum FloorCoat PU 7200 Floor Paint is a single pack elastomeric floor paint that is available in a range of stock colours but offers the added benefit of being tintable by Promain on the Rustoleum CS2 tinting machine to many other colours, this floor paint is ideally suited for use factories, workshops and garages, PU7200 has been formulated for use internally and externally and being available in a stock yellow that makes a durable line marking paint.
With the introduction of these faster drying floor paints and primers repainting of floors can be carried out faster and the return to service therefore quicker making floor painting far easier during the winter months when floor temperatures are low for instance over the Christmas shut down when many companies carry out repainting.